Operation Manual

1
English
Installation
You must install and charge the battery before using the headset.
Installation options
IMPORTANT: If you have the handset lifter (purchased separately), follow the
installation instructions in the Lifter for hs1910 DECT manual.
Installation options:
Using the headset connected to the handset socket on any telephone.
q

MUST be lit on the base (see Settings).
Using the headset connected to a telephone with separate headset outlet.
q

MUST be lit on the base (see Settings).
Using the headset with a standard analog telephone line as a stand-alone
product.
T
MUST be lit on the base (see Settings).
Using the headset with a standard analog telephone line together with a
telephone.
T
MUST be lit on the base (see Settings).
Cord labels
The cords provided with your headset have coloured labels attached to help you
plug them into the headset base. The back of the headset base has coloured
dots above the sockets that correspond to the labels on the cords.
Headset base installation
Before installing the headset base: Remove the rear bottom piece of the headset
base by pushing it away from the base.
Install the headset base as shown on the
following pages.
After completing the installation:
Slide the rear bottom piece towards the
base until it clicks into place.
Changable adapters
The mains power adapter has changable
plugs
Place the UK or EU plug in the
adapter slot.
Slide it gently downwards until you hear
a click. The adapter is now ready for use.
To change plug, press the release
button.
1.
2.
3.
4.
1.
2.
3.
2
1
3
EU
UK