Technical data

17
English
BS SETTINGS
A PIN (Personal Identication Number) is needed to access
the settings for the base unit. The default PIN is 0000.
See also Change PIN below.
BASE RINGER MELODY
Select one of the ve different melodies and press
=
to conrm.
BASE RINGER VOLUME
Select LEVEL 01-05 or RINGER OFF and press
=
.
With RINGER OFF, the call indicator LED will still indicate
incoming calls. The handset ring signal will be heard unless it
is also disabled (see BS SETTINGS).
CHANGE PIN
Enter a new PIN code and press =, then enter the PIN again
and conrm with
=
.
DIAL MODE
Select TONE or PULSE dialling mode and conrm with
=
. If
unsure about which mode to use, select TONE.