Technical information

2
English
Settings
Connection
1. Connect the telephone cord to a telephone network
wall socket and to the
T
socket on the back of the
telephone.
2. Connect the spiral cord to the handset and to the
q
socket on the base of the telephone. See Technical
Information (6).
3. You will hear a click when the modular plug is correctly in
place.
4. Set correct Flash (R) button time to 100. See Technical
Information (4).
5. Lift the handset and listen for the dial tone.
Memories
Saving speed dial numbers
1. Make sure that the
R
/
P
switch on the base of the
telephone is set to
P
. See Technical Information (5).
2. Lift the receiver and press
P
(
R
) (ignore anything you
hear in the earpiece).
3. Enter the phone number (up to 16 digits) using the
keypad. Press
P
(
R
).
4. Select memory position by pressing the corresponding
button.
5. Replace the handset. The number has now been saved.
Remember to return the
R
/
P
switch on the base of the
telephone (5) to the
R
position when all the telephone
numbers have been saved.
Press if you want a pause in the telephone number.