Doro 780X English
1 2 2 3 4 13 14 5 15 6 16 7 17 8 9 10 18 19 11 12 1
Note! All illustrations may not accurately depict the actual device. 20 1. 2. 3. 4. 5. 6. 7. 8. 9. Charging socket Headset socket Speaker Power on/off button Clear button Four-way navigation keys / OK-button Menu button Call button End call/back button 10. Speed dial keys (A – C) The items supplied with your phone might vary depending on the software and accessories available in your region or offered by your service provider. You can obtain additional accessories from your local Doro dealer.
English Contents Congratulations on your purchase ................................................................ 1 Getting started ............................................................................................... 1 Unbox your new phone ......................................................................... 1 Insert SIM card, memory card and battery ........................................... 2 Charge the phone................................................................................
English Advanced settings ................................................................................... 22 Phonebook settings.............................................................................. 22 Settings................................................................................................. 24 Additional functions ..................................................................................... 47 Display status symbols ........................................................
English Congratulations on your purchase The water-resistant, easy-to-use Doro 780X makes staying safe a whole lot simpler with three speed dial keys for easily calling one's most relied on contacts. Excellent safety features include an assistance button and safety timer function that can automatically send an alarm with GPS location to preset contacts via the service Response by Doro . For more information about accessories or other Doro products please visit www.doro.com or contact our Helpline.
English Insert SIM card, memory card and battery The SIM and memory card holder’s are located inside the battery compartment. Tip: Take care not to scratch the metallic contacts on the cards when inserting them into the card holders. Remove the battery cover IMPORTANT! Turn off the phone and disconnect the charger before removing the battery cover. Be careful not to damage your fingernails when you remove the battery cover. Do not bend or twist the battery cover excessively as it may get damaged.
English Insert the SIM and memory cards Insert the micro-SIM (3FF) card by gently sliding it into the SIM card slot. Make sure that the SIM card’s contacts are facing inwards and that the cut off corner is as shown. You can insert a second SIM card so you can have two phone numbers or service providers on a single device. Data transfer speeds may be slower, in some cases, if two SIM cards are inserted in the device than when one SIM card is inserted.
English Insert the battery Insert the battery by sliding it into the battery compartment. Replace the back cover. Charge the phone While it’s possible that your phone will already come with enough power to be turned on right out of the box, we recommend charging the device fully before using it. CAUTION Only use batteries, chargers and accessories that have been approved for use with this particular model.
English A B C D A. Connect the small head of the USB charging cable to the charging socket y on the phone. B. You can also charge the phone using the cradle. Connect the small head of the USB charging cable to the cradle. Place the phone in the cradle. C. Plug the power adapter to a wall power outlet. D. You can also plug a standard USB cable into a USB port on your computer. Generally charging is quicker if plugged directly into the wall socket. Note! Cable not included. Only for charging.
English device may feel warm. In most cases, this is normal. To save battery and energy even further, see Battery saver, p.35. Turn the phone on and off 1. 2. Press and hold on the phone to turn it on or off. Press OK to Power off. If the SIM card is valid but protected with a PIN code (Personal Identification Number), Enter SIM PIN is displayed. Enter SIM PIN 1. Press to enter input mode. 2. Use the Four-way navigation key to select number and press enter each digit. 3. Delete entry with 4.
English 7. Re-enter the new PIN code and confirm with . Note! If PIN and PUK codes were not provided with your SIM card, please contact your service provider. If you enter the wrong PUK code more than 10 times the SIM card gets permanently locked. Get to know your phone Assistive functions Use the symbols below to guide you through supporting sections in the manual.
English Phone indicators Lights on the phone: • • Green light when you have a new notification for a message, missed call, etc. Red light when the battery is running low and during charging. Notification panel and status bar At the top of the main screen to the left you can see if there are any notifications. The number will show how many notifications you have. • • To view the notifications, press the options/notifications button Press Clear all to remove all notifications. .
English Basic phone operations Power on and off : Long press to power on or off. • Call : Dial a number or answer incoming call. Enter the call log. • • End call/back : End calls or return to the start screen. Return to the previous screen. • • Assistance : Press to make an assistance call. Clear : Press to clear the previous character. Settings menu : Press and hold to enter the settings menu.
English Standby (idle mode) When the phone is ready to use, and you have not keyed in any characters, the phone is in standby. • • Press to return to standby mode. Press the options button to access the notices, if there’s any. Tip: You can always press to return to standby. Volume keys + / – • During a call the volume keys adjusts the call volume. See also Volume , p.36 for more information.
English • • • • • Press to access the character input mode. Use the Four-way navigation key to select the wanted character and press to select it. Press Mode to change input mode. Select between capital letters, small letters, numbers and special characters. The space character (˽) is found firstly among the special characters. Press to confirm the entered text. If wanted, press to continue to enter more characters. Press to exit the character input mode.
English Calls Make a call Note! The speed dial keys A, B and C must have numbers configured before it’s possible to dial. See Phonebook settings, p.22. Tip: For international calls, always use + before the country code for best operation. 1. Press A, B or C. 2. Press to make the call. Note! If you have more than one SIM card installed, you will be asked what SIM card to use. To set the preferred SIM card, first check Always use this for calls and then select SIM card. See also Dual SIM settings, p.33.
English 2 1 Tip: Press and hold the volume keys + or – to temporarily switch off the ringtone. Note! You can also let the phone automatically answer calls within a set time from specific numbers. See Auto answer, p.38. Loudspeaker mode The loudspeaker allows you to speak without holding the phone closely to the ear. Speak clearly into the phone microphone (A) at a maximum distance of 1 m. 1. Press to activate loudspeaker mode 2. Press again to deactivate loudspeaker mode 13 . .
English 1 2 A Call information During a call, the outgoing or incoming phone number and the elapsed call time is displayed. If the identity of the caller is withheld or unknown, Private number or Unknown are displayed. Call options Options During a call the options button ( • • • ) give access to additional functions. Add call to call another number. When the second party is connected you can Merge and Swap. Manage is available during a conference call.
English The Assistance button on the back of the phone allows easy access to contact your predefined Responders (family and friends) if you should need help. The function relies on that the Responder of an assistance alert has the smartphone app, Response by Doro installed on their smartphone and the link with the Senior’s Doro phone is setup. When the setup is done, press and hold the Assistance button for 3 seconds, or press it twice within 1 second. The assistance call begins after a delay.
English For the Responder Download and install the app Response by Doro Before you setup an account you need to download and install the app Response by Doro. For iPhones For Android phones https://apps.apple.com/app/response-by-doro/id1437509312 https://play.google.com/store/apps/ details?id=com.doro.apps.mydoro. relative Create an account in the app Response by Doro The first Responder that sets up an account and invites the Senior user will be the Admin for the Group of Responders. 1.
English 6. Your account has now been verified and now you should complete the set-up by inviting the Senior that you wish to be able to assist. See Add Senior, p.17. Note! To help the Doro phone user remotely from a computer a Responder can also visit the web page www.mydoro.com. The My Doro Manager helper application that is available through Play Store or App store is for older phone models and is NOT compatible with Doro 780X.
English Senior and Responder are now connected and the Senior can make an alarm with the assistance button on the back of the Doro phone to test the service. The Responder can now also use the app Response to check the status of the Doro phone and quickly assist with some basic phone settings, like sound and display settings. Both the Senior and the Responder can now also invite more persons to act as Responders.
English Lock keys 1. Press to open the 2. Press . Unlock • Longpress Menu Lock keys. . Note! Depending on phone settings, automatic key lock can be enabled after a set time. See Keypad lock, p.42. SOS calls As long as the phone is switched on, it is possible to place an SOS call by following the below description. 1. Press for Menu SOS call Yes Some networks accept calls to emergency numbers without a valid SIM card. Contact your service provider for more information.
English Activate the safety timer 1. Press 2. Select Set the timer and press to enter time, maximum 120 minutes. Press Start to activate the timer. 3. for Menu Safety Timer. Deactivate the safety timer Press Cancel to stop and deactivate the timer before the set time have expired. Once the timer has expired you will be asked “Are you OK?”: • • Press Yes to cancel the alarm. Press No or do nothing to let the alarm proceed.
English Messaging options Settings Text message (SMS) SMS Service centre Text messages requires a message center number, this is normally automatically set on your phone. The number can be obtained from the mobile carrier. 1. Press Menu Messaging message (SMS) SMS Service centre plicable) . 2. Enter the service center number. 3. Press OK to confirm. Delete all conversations It’s possible to delete all message conversations. 1. 2. Press Menu Messaging lete all conversations. Press Delete to confirm.
English 5. Press Clear call history to delete all entries in the call log. My number The phone number assigned to your SIM card is saved as My number. The number might already be saved on your SIM card from the beginning, if not you may add it. See Set My number settings, p.23. 1. Press Menu 2. Press to view your stored number. My number. Advanced settings Phonebook settings Set speed dial keys 1. 2. 3. 4. Press and hold Press Phonebook select A - C.
English 2. Press Edit to add or edit information in each entry. • Name: enter your name. • Birth date: enter your date of birth. • Height: enter your height. • Weight: enter your weight. • Address: enter your home address. • Language: enter your preferred language. • Insurance: enter your insurance provider and policy number. • Contact 1: add contact from phonebook. • Contact 2: add contact from phonebook. • Doctor: add contact from phonebook.
English 1. 2. Press and hold Phonebook Emergency call. Press for the options: • Edit to edit the number. When done, press OK. • Delete to delete the selected number. Press OK to confirm. Settings Network & Internet Aeroplane mode In Aeroplane mode you can’t make or receive calls, initiate assistance alarms or do anything that requires an Internet connection, this is to prevent disturbance to sensitive equipment. When you take your phone abroad, you can keep it in flight mode.
English 2. Set the switch to to activate it. Set the switch to deactivate. Connect to available networks 1. 2. to Press and hold Settings Network & Internet WiFi. If Wi-Fi is activated a list of available Wi-Fi networks will be displayed after a moment. Note! If nothing is displayed although you know that there should be available networks, set the switch to off and then on again. 3. Select your wanted network and press and enter the Password. Note! Check Show password to see it in clear text. 4.
English WPS Pin Entry: Enter the given PIN code on the router/access point. The setup can take up to two minutes to complete. Saved networks View your saved networks. Select it and press . Press Forget if it’s an unwanted network, to disconnect from it and stop connecting to it automatically. • Mobile network You can see the active network operator. To change network operator, see Network operators, p.29. Data roaming Your phone automatically selects your (service providers) home network if within range.
English IMPORTANT! If you set your phone to use 2G or 3G, you will not be able to make any calls, including emergency calls, or use other features requiring a network connection, if the selected network type is unavailable. Enhanced 4G LTE Mode Set if voice calling over LTE network should be enabled or disabled. This menu is only visible if your service provider supports the feature. 1. Press and hold bile network 2. Set the switch Enhanced 4G LTE Mode to to deactivate.
English 2. To change and existing APN profile, select a profile and press . If your service provider’s profile is not in the list, press New APN to enter settings for your service provider: • Name to enter a name for the APN. • APN to enter the APN address. • Proxy to enter HTTP proxy address. • Port to enter HTTP proxy port. • Username to enter user name. • Password to enter password. • Server to enter password. • MMSC to enter the MMSC. • MMS proxy to enter MMS proxy address.
English Network operators Your phone automatically selects the network operator that you have a subscription with. When roaming or if you otherwise have no signal you can try to manually select a network. 1. 2. Press and hold Settings Network & Internet bile network Network operators. Wait for the list of operators and select the wanted operator or Choose automatically. Mo- IMPORTANT! If you select a network manually, your phone will lose network connection when the selected network is out of reach.
English Enable/disable mobile data for services. Select off charges. 1. to avoid data Press and hold Settings Network & Internet ta usage select SIM card (if applicable) Mobile data. Da- 2. Set the switch to on to activate it or off to deactivate. Mobile data usage The Mobile data usage counter gathers traffic information from all apps using mobile data. You can keep track of the amount of data transferred to and from your device over the mobile network since last reset. 1. 2.
English Hotspot & tethering IMPORTANT! Using mobile data services can be costly. We recommend that you check your data rates with your service provider. Allow other devices to share your phone’s Internet connection by connecting via USB, Bluetooth or Wi-Fi. Internet sharing only works if you phone is connected to the Internet over the mobile data network and it will disable any existing Wi-Fi connection on the phone while active.
English IMPORTANT! Always have the security turned on when your Wi-Fi hotspot is active to prevent unauthorized use of your internet connection. Turn off the Wi-Fi hotspot feature when you no longer need to share Internet access for other devices. When the feature is activated it will drain your phone's battery significantly. 1. Press and hold spot & tethering 2. 3. Set the switch to on to enable Internet sharing via Wi-Fi.
English Dual SIM settings If you have more than one SIM card installed, you will be asked what SIM card to use. Here you can set the preferred SIM card for different types of mobile traffic. 1. Press and hold al SIM settings. Settings Network & Internet Du- 2. 3. Set the switch to on for each SIM card slot you want enabled. Select the preferred SIM card for the different types of mobile traffic.
English 1. Press and hold Settings Connected devices Bluetooth. 2. Keep the menu open and the display lit to make your device visible to other devices. Device name 1. Press and hold Settings Connected devices Bluetooth Device name. 2. Doro DFB-0330 is displayed. 3. Edit the new name. 4. Press Rename to save and your new name should appear for other Bluetooth devices. Received files You can both send and receive files via Bluetooth. Here you can see the files received via Bluetooth. 1.
English 1. Press and hold Settings Connected devices Bluetooth Pair new device. 2. Make sure that the device you want to connect with is visible and in pairing mode. 3. Wait for the search to display the wanted device to select it and press to connect. When connecting to another Bluetooth device you may need to enter a password or confirm a shared key. Bluetooth address Here you can see the Bluetooth address of your phone. Battery See your phone’s battery status and activate power saving mode.
English Display Brightness level You can adjust the brightness of the display. 1. Press and hold 2. Set the brightness to comfortable level and press Settings Display Brightness level. when done. Note! The brighter the display is, the more batter power it will consume. Sleep Select the delay time for the display backlight. 1. 2. Press and hold Settings Display Select the how long time the display lit. Sleep. 3. Press to confirm. Colour inversion Colour inversion exchanges colour values.
English 3. Press when done. Audio setup If you use a hearing aid or have hearing difficulties when using the device in a noisy environment, you can adjust the audio settings. 1. Press and hold Settings Sound Audio setup: • Normal for normal hearing in normal conditions. • High for moderate hearing impairment or use in a very noisy environment. • HAC mode for use with hearing aid. 2. Press to confirm. Note! Try different settings to find the one that suits your hearing the best.
English SIM2 Phone ringtone to set the ringtone for incoming calls on SIM2. • Default notification sound to set the tone for new notifications. Press to confirm. • 3. Calls (call settings) Note! You might need to select the SIM card you want to handle for each setting. You can access the call settings via press and hold Calls. Settings Auto answer Select to activate auto answer to answer incoming calls from contacts saved in the number list in handsfree/speakerphone mode. 1. Press and hold 2. 3.
English 1. Press and hold Settings Fixed dialling numbers: Calls select SIM card • • Enable FDN enter PIN2 to enable the feature. Change PIN2 to change the PIN2 code. • FDN list to add and enter the first allowed number. You can add more numbers or edit or delete existing. Note! You can save parts of phone numbers. For example, if you save 01234, allows calls to all numbers starting with 01234.
English 1. 2. 3. 4. Press and hold Settings Calls select SIM card Call barring. Mark the type of calls that you want to restrict: • All outgoing calls to answer incoming calls but not calling. • International outgoing calls to block calls to international numbers. • International outgoing calls except to home PLMN to block international calls except to the country associated with the SIM card. • All incoming calls to call but not to receive incoming calls.
English Activate call waiting 1. Press and hold Settings Additional settings. 2. Set Call waiting switch to Tip: Set switch to Calls select SIM card to enable call waiting. to disable call waiting. Call blocking You can compile a blacklist of phone numbers so that any phone number on your blacklist is blocked when calling or texting you. Activate the function and add blacklist numbers 1. 2. 3. PPress and hold Settings Calls Call blocking.
English Security & location Passwords Change phone code 1. 2. 3. 4. Press and hold Settings Passwords Phone code. Enter current code and press OK. Enter new code and press OK. Confirm new code and press OK. Security & location Note! The default phone code is 1234 and is used for e.g. resetting the phone. Keypad lock The phone automatically locks after the set time period. 1. 2. Press and hold Settings Security & location pad lock Auto keylock. Select after what time the phone automatically locks.
English 1. 2. Press and hold Location. Enable the switch Select mode: Settings Network & Internet to enable location positioning. High accuracy: for best location accuracy. This uses every service available: GPS, Wi-Fi, Bluetooth, and/or mobile networks in whatever combination available. This is quite battery consuming. • Battery saving: to reduce battery consumption by disabling GPS.
English Press and hold Settings subject you want to change. Start-up Wizard and select the Tutorials Here are some useful tutorials for various features. Press and hold Settings Tutorials. SIM Toolkit Your service provider can provide some various value-added services. Press and hold Settings SIM Toolkit (if applicable) for the provided services. select SIM card Response See Response by Doro, p.15. Messages settings Auto reply Set to automatically send an auto reply for all received text messages.
English 2. Select a language. Predictive text 1. Press and hold Settings input Predictive text. 2. Set Predictive text on/off with Date & time System Languages & . Tip: The phone is set to automatically update time and date according to current time zone. To turn off, select Date & time Automatic date & time . Automatic update of date and time does not change the time you have set for the alarm clock or the calendar. They are in local time.
English 1. Press and hold Settings System Software update. 2. Press Check for updates to manually check if there’s a software update available. 3. Press Settings for software update settings: • Automatically check for update to set how often the phone automatically should check for new updates. • Updates via Wi-Fi only, to only allow update packages to be downloaded over Wi-Fi network.
English 1. Press and hold Settings System Reset options Scheduled power on & off. 2. Press On or Off for the following options. • Time to set the time when the phone should be turned On or Off. • Check Repeat to select what days the setting should be valid for. 3. Press Done to confirm. About phone See information regarding your phone. 1. Press and hold Settings System About phone: • Status: to see the status for various items on your phone. • Model: to see the model number.
English Safety instructions CAUTION The unit and the accessories can contain small parts. Keep all of the equipment out of the reach of small children. The mains adapter is the disconnect device between the product and mains power. The mains socket outlet must be close to the equipment and easily accessible.
English Areas with explosion risk Always turn off the unit when you are in an area where there is a risk of explosion. Follow all signs and instructions. There is a risk of explosion in places that include areas where you are normally requested to turn off your car engine. In these areas, sparks can cause explosion or fire which can lead to personal injury or even death. Turn off the unit at filling stations, and any other place that has fuel pumps and auto repair facilities.
English GPS/Location based functions Some products provide GPS/Location based functions. Location determining functionality is provided “As is”. No representation or warranty are made as to the accuracy of such location information. Use of location-based information by the device may not be uninterrupted or error free and may additionally be dependent on network service availability.
English Malware and viruses To protect your device from malware and viruses, follow these usage tips. Failure to do so may result in damages or loss of data that may not be covered by the warranty service. • • • • • • • • Do not download unknown applications. Do not visit untrusted websites. Delete suspicious messages or email from unknown senders. Set a password and change it regularly. Deactivate wireless features, such as Bluetooth, when not in use.
English Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard. • Promptly dispose of used batteries in accordance with local regulations. • Battery usage by children should be supervised. • Improper battery use may result in a fire, explosion or other hazard.
English Bluetooth (MHz) [maximum radio-frequency power/dBm]: GPS receiver: Operating system: SIM card size: Dimensions Weight Battery Operating ambient temperature Charging ambient temperature Storage temperature 4.2, (2402 - 2480) [10] Category 3 DorOS micro-SIM (3FF) 138 mm x 60 mm x 13 mm 117 g (including battery) 3.
English Other product and company names mentioned herein may be the trademarks of their respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners. To the maximum extent permitted by applicable law, under no circumstances shall Doro or any of its licensors be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
English hearing aid’s built-in microphone. For the best results, try using the phone in different positions relative to your hearing aid—for example, placing the receiver slightly above the ear may result in better performance for hearing aids with microphones positioned behind the ear. • T: To use your hearing aid in this mode, make sure that your hearing aid is set to "Tmode" or telecoil coupling mode (not all hearing aids have this mode).
English The marking on the battery, manual or packaging indicates that the battery in this product should not be disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
DFB-0330 (Doro 780X) (1011, 1021, 1031, 1041) English Version 1.0 ©2020 Doro AB. All rights reserved. www.doro.
