User manual

English
CAUTION
Only use batteries, chargers and accessories that have been approved for
use with this particular model. Using unapproved accessories may be
dangerous and may invalidate the phone's type approval and warranty.
When the battery is running low,
is displayed and a warning signal is
heard. When the charger is connected to the phone,
is displayed
briefly, and
when it is disconnected. The battery charge indicator is ani-
mated while charging. It takes approximately 3 hours to fully charge the
battery. If the phone is turned off when the charger is connected to the
phone only the battery charge indicator will be shown on the display.
When charging is completed,
is displayed on the screen.
Use a wall power outlet to charge
1. Connect the small head of the USB charging cable to the charging
socket y on the phone.
2. Plug the large head of the cable to the USB charger.
3. Plug the power adapter to a wall power outlet.
Use a charging cradle to charge (optional)
1. Connect the small head of the USB charging cable to the cradle. Place
the phone in the cradle.
2. Plug the large head of the cable to the power adapter.
3. Plug the power adapter to a wall power outlet.
Use a computer or other power source to charge
1. Connect the small head of the USB charging cable to the phone.
2. Plug the large head of the cable to the computer’s USB port.
Note! Generally charging is quicker if plugged directly into the wall.
If the phone is turned off during charging, the phone is still charging. Press
to view charging status.
Save energy
When the battery is fully charged, disconnect the charger from the device
and unplug the charger from the wall outlet. To save power, the screen
turns off after a while. Press any button to wake the screen up. Full battery
capacity will not be reached until the battery has been charged 3–4 times.
Batteries degrade over time, which means that call time and standby time
4