Specifications

English
scratch or bend the contacts on the card. To remove or replace the
card, push the card in until you hear a click and then pull the card
out.
3. Insert the SIM card by gently sliding it into the holder. Make sure
that the SIM card’s contacts are facing down and that the cut off cor-
ner is pointing out. Take care not to scratch or bend the contacts on
the SIM card.
4. Insert the battery by sliding it into the battery compartment with the
contacts facing downwards to the right.
5. Replace the battery cover.
IMPORTANT!
This device accepts mini SIM or 2FF SIM card. Use of incompatible SIM
cards may damage the card or the device, and may corrupt data stored
on the card.
IMPORTANT!
Use only compatible memory cards for use with this device. Compatible
card type: microSD, microSDHC.
Incompatible cards may damage the card itself, the device and corrupt
data stored on the card. Depending on the market some phones may
have a pre-installed memory card.
Charge the phone
CAUTION
Only use batteries, charger and accessories that have been approved
for use with this particular model. Connecting other accessories may
be dangerous and may invalidate the phones type approval and
guarantee.
When the battery is running low,
is displayed and a warning signal is
heard.
1. Connect the mains adapter to a wall socket and to the charging
socket y. The battery charge indicator is animated while charg-
ing. It takes approximately 3 hours to fully charge the battery. When
the charger is connected to the phone,
is displayed briefly, and
when it is disconnected.
2. When charging is completed,
is displayed on the screen.
2