Specifications
Table Of Contents
- Congratulations on your purchase
- Get started
- Insert SIM card, memory card and the battery
- Get to know your phone
- Assistive functions
- Calls
- Make a call
- Phonebook
- Add contact
- Assistance button
- Make an assistance call
- Messages
- Create and send text message (SMS)
- Camera
- Camera
- Bluetooth settings
- Network setup
- Services
- Connect the phone to a computer
- File manager
- Sound & Display
- Audio setup
- Additional functions
- FM radio
- Troubleshooting
- Safety instructions
- Network services and costs
- Care and maintenance
- Warranty
- Copyright and other notices
- Content copyright
- Specifications
- Specific Absorption Rate (SAR)
English
Tip: The default phone code is 1234.
Troubleshooting
Phone cannot be switched on
Battery charge low
Connect the power adapter and charge the bat-
tery for 3 hours. Full battery capacity is reached
after the battery has been charged 3–4 times.
Battery incorrectly
installed
Check the installation of the battery.
Failure to charge the battery
Battery or charger
damaged
Check the battery and charger.
Battery should only be
charged in temperatures
between 0 °C and 40 °C
Improve the charging environment.
Charger incorrectly con-
nected to phone or
power socket
Check the charger connections.
Standby time decreases
Battery charge capacity
too low
Install a new battery.
Too far from base sta-
tion, phone is constantly
searching for signal
Searching the network consumes battery power.
Find a place with a stronger signal, or tempora-
rily turn off the phone.
Failure to place or receive calls
Call barring activated Deactivate call barring. If this does not solve the
problem, contact your service provider.
PIN code not accepted
Wrong PIN code entered
too many times
Enter the PUK code to change the PIN code, or
contact your service provider.
45