Doro PhoneEasy 607 ® English
1 13 14 15 2 3 17 4 5 12 16 6 7 10 9 11 8 18 19 20
English 1. Earpiece 2. Microphone 3. Arrow buttons 4. Left selection button 5. Call button 6. Speed dial 7. Voice mail 8. Silent / Input method 9. Camera shortcut 10. Message shortcut 11. End call/Power on/off 12. Right selection button 13. Red light = Battery level low / Charging 14. Green light = New message / Missed call 15. Camera lens 16. Assistance button 17. Loudspeaker 18. Volume keys 19. Charging socket 20.
English Contents Installation ................................................................................ 1 Installing the SIM card, memory card and the battery ............. 1 Charging .................................................................................... 2 Symbols .................................................................................... 3 Assistive functions ............................................................... 3 Display status symbols .............................
English Image viewer..............................................................................20 Image viewer, options...........................................................20 Settings .....................................................................................21 General ...............................................................................21 Sound .................................................................................24 Display...........................................
English Installation IMPORTANT! Turn off the phone and disconnect the charger before removing the battery cover. Installing the SIM card, memory card and the battery The SIM card holder is located behind the battery. 1 2 3 4 GB GB 1. 2. 3. Remove the battery cover and the battery if it is already installed. Insert the SIM card by gently sliding it into the holder. Make sure that the SIM card’s contacts are facing inwards and that the cut off corner is pointing downwards.
English 4. Replace the battery cover. Charging CAUTION Only use batteries, charger and accessories that have been approved for use with this particular model. Connecting other accessories may be dangerous and may invalidate the phones type approval and guarantee. When the battery is running low, is displayed and a warning signal is heard. To charge the battery, connect the mains adapter to a wall socket and to the charging socket y.
English Symbols Assistive functions The following symbols indicate information in the manual about assistive functions for: Seeing Handling Hearing Safety Display status symbols Signal strength No network coverage Ring only 5 Unread message in Inbox Ring + vibration Alarm active Vibration only Battery level Silent Call forward activated Roaming (in other network) Headset connected Missed call Voice mail message received 3
English Display main symbols Mute Charger connected Message sending successful Charger removed Message sending failed Headset in Error Headset out Warning Speaker on Query Speaker off Done (confirmed) Incoming call New message Outgoing call Battery level low Call ended Searching Missed call. Press Read to see the missed calls.
English Operation Activating the phone on the phone to turn it on/off. Press and hold the red button Confirm with Yes to power off. If the SIM card is valid but protected with a PIN code (Personal Identification Number), PIN is displayed. Enter the PIN code and press OK ( upper left corner of keypad). Delete with Clear ( upper right corner of keypad). Note! If PIN and PUK codes were not provided with your SIM card, please contact your service provider.
English Changing the language, time and date The default language is determined by the SIM card. See General, p.21 on how to change language, time and date. Making a call 1. 2. 3. Enter the phone number including the area code. Delete with Clear. to dial. Press Abort to cancel dialling. Press to end the call. Press Tip: For international calls, always use + before the country code for best operation. Press * twice for the international prefix +. Making a call from the Phonebook 1. 2. 3.
English environment, you can customise the phones audio settings, see Audio setup , p.25. Entering text Press a numerical key repeatedly until the desired character is shown. Wait a few seconds before entering the next character. Press * for a list of special characters. Select the desired character with / and press OK to enter it. Use the side keys +/– or / to move the cursor within the text. Press # to cycle upper case, lower case and numerals. Press and hold # to change input language.
English Call options During a call the selection buttons1 ( functions: ) give access to additional Options (left selection button) A menu with the following options is displayed: Hold single call/Retrieve single End single call New call Phonebook Messages Mute Hold/retrieve the current call. End the current call (same as ). Call another number (Conference). Search the phonebook. Write or read SMS messages. Disable the microphone.
English Call information During a call, the outgoing or incoming phone number and the elapsed call time is displayed. If the identity of the caller is withheld, Unknown is displayed. Silent Silent is a fixed profile with Keypad tone, Message tone and Ringtone disabled, while Vibration, Tasks and Alarm are unchanged. Tip: Press and hold shortcut button # to activate/deactivate Silent. Headset When a headset is connected, the internal microphone in the phone is automatically disconnected.
English Assistance button IMPORTANT! Always inform recipients in the Number list that they are listed as your assistance contacts. CAUTION When an assistance call is activated the phone is pre-set to handsfree/speakerphone mode. Do not hold the device near your ear when the handsfree mode is in use, because the volume may be extremely loud. The Assistance button allows easy access to contact your predefined help numbers (Number list) should you need help.
English Note! Some private security companies can accept automatic calls from their clients. Always contact the security company before using their phone number. IMPORTANT! Information to the receiver of an assistance call, when Confirm with "0" is activated: After receiving the assistance message, each number in the Number list will be called sequentially. To confirm the assistance call, the receiver needs to press 0.
English Creating ICE entry (In Case of Emergency) With this additional information and medical information, first responders can access this information from the victim's phone in case of emergency. In the event of a trauma, it is critical to have this information as early as possible which can increase the chances of survival. All fields are optional, but the more information provided the better. See ICE (In Case of Emergency) , p.13 on how to configure your ICE information.
English Enter the phone code and press OK to confirm. The default phone code is 1234. Copy all Select From SIM and press OK to copy all phonebook entries from the SIM card to the phone memory. Press Yes to confirm or No to abort. Select From phone and press OK to copy all phonebook entries from the phone memory to the SIM card. Press Yes to confirm or No to abort. Send vCard Select Send by SMS and press OK to send the selected phonebook entry as a vCard via SMS. Enter the phone number of the recipient.
English Weight: Language: Insurance: Contact 1: Contact 2: Doctor: Condition: Allergies: Blood type: Vaccination: Medication: Other info: Your weight. Your language. Your insurance provider and policy number. Press Options and then OK to Add or Delete a contact from the phonebook, or Save to accept the current entry. If possible, add your relationship to your ICE contacts in the phonebook, such as “ICE Wife Mary Smith”. Any medical conditions/medical devices (e.g. diabetic, pacemaker).
English Note! If you choose to add multiple recipients, you will be charged for each recipient (maximum 10). For international calls, always use + before the country code for best operation. Press * twice for the international prefix +. Creating and sending voice message A voice message use the same technology as an MMS. Both you and the recipient must have subscriptions that support MMS. The settings for MMS is supplied by your service provider and can be sent to you automatically via SMS.
English 2. 3. 4. 5. Select MMS and press OK. Type your message, see Entering text , p. 7 , then press Options. Add items to your message from the options Add subject, Add picture, Add sound and Add video. Add recipients with To and Send when ready. Add subject 1. 2. Select Add subject and press OK. Type your subject, then press Done. Add picture 1. 2. 3. 4. 5. Select Add picture and press OK.
English Add recipients (To) Select To and press OK to select recipient from Phonebook and press Add. Alternatively, select Enter number and press Select to add recipient manually and press Done. Select Add to add more recipients or select Send to send and then press OK. You can also modify the recipients by selecting one and press Options to Edit, Delete or Delete all. 1. 2. 3. Inbox, Sent, Outbox / SMS/MMS unread / SMS/MMS sent / SMS/MMS read / SMS/MMS unsent 1. 2. 3. 4.
English Edit Edit the message, then press Send. Forward Forward a message. Edit the message (if desired), then press Send. Use number Displays all phone numbers contained in the message as well as the sender's number. Call Save Send SMS Send MMS Call the selected number. Save the number in the Phonebook. Write a new SMS message. Write a new MMS message. Save objects (MMS only) To save text and media objects such as pictures, sound recordings and video.
English 3. Press settings: View Delete Delete all Save to dial the number or press Options for the following Show details for the selected call. Delete the call. Delete all calls in the Call log. Save the number in the Phonebook. Camera (take photos) To get sharp photos, wipe the lens clean with a dry cloth. 1. 2. 3. Press shortcut or press Menu, scroll to and press OK. Press to take photo. Press Options or Back (if you do not make any selection the picture is saved).
English • Use the side buttons +/– to adjust EV/Light sensitivity. Note! Zoom may reduce image quality. For more camera settings, see Camera, p.36. Image viewer View your saved images. 1. 2. 3. Press Menu, scroll to and press OK. Select an image, then press Options. Select one of the following options and press OK. Image viewer, options View Single view. Press Back when done. Send Select an option, then press OK: Send by MMS Send by Bluetooth Send image as MMS.
English Rename Rename image. Delete with Clear and press Done to confirm. Browse style You can change image view. Default is Large, you can also select List or Medium. In List the file name, the date and the size of the image is shown. Sort by Select if you want to sort your images by Name or Time. Storage Select where the phone should save files if you have memory card installed. Delete all Press OK to delete all images. Press Yes to confirm or No to return.
English 2. 3. 4. 5. 6. 7. 8. Select Select Select Select Select Select Select General and press OK. Time & date and press OK. Set format and press OK. Time format and press OK. 12 hours or 24 hours and press OK. Date format and press OK. the desired date format and press OK. Setting Auto time on/off and press OK. 1. Press Menu, scroll to 2. Select General and press OK. 3. Select Time & date and press OK. 4. Select Auto time and press OK. 5. Select On/Off and press OK.
English Owner number The phone numbers assigned to your SIM card are saved if this is allowed by the card. To view/edit the numbers: 1. 2. 3. and press OK. Press Menu, scroll to Select General and press OK. Select Owner number and press OK. See Phonebook, p.11 on how to add names/numbers. To edit or delete an existing entry, select it and press Options, then select Edit or Delete and press OK. Block function You can disable functions to simplify the use of the phone. 1. 2. 3. 4. 5.
English Select network To view available networks, press Select network. A list of available network operators is displayed (after a short delay). Select desired operator and press OK. Network mode To select another network, select Network mode and then select one of the following options. Automatic Manual Network is selected automatically. Network is selected manually. Use Select network to select desired operator. Services This menu may contain pre-programmed services from your network provider.
English Audio setup If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment, you can customise the phones audio settings. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Audio setup and press OK. Select one of the following options and press OK. Normal Medium High For normal hearing in normal conditions. For mild hearing impairment or usage in noisy environment.
English Tip: Press and hold shortcut button # to activate/deactivate Silent mode. Alert type Incoming calls can be signalled by a ring tone and/or vibration. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Alert type and press OK. / to select signalling mode, then press OK. Scroll Ring only Vib. only Vib. and ring Vib. then ring Silent Ring tone only. Vibration only. Vibration and ring tone. Starts with vibration and adds ring tone after a short while.
English 5. Press OK to confirm or Back to discard changes. Text size You can customise the text size for messages and the phonebook. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Display and press OK. Select Text size and press OK. Select Normal or Large and press OK. Idle display In standby mode the display can show clock only, clock and the service provider or all information. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Display and press OK. Select Idle display and press OK.
English 2. 3. 4. Select Display and press OK. Select Brightness and press OK. Select Level 1–Level 3 and press OK. Calls Voice mail If your subscription includes an answering service, callers can leave a voice mail message when you cannot answer a call. Voice mail is a network service and you may need to subscribe to it first. For more information and for the voice mail number, contact your service provider. 1. 2. 3. 4. 5. 6. Press Menu, scroll to and press OK. Select Calls and press OK.
English Adding speed dial numbers and press OK. 1. Press Menu, scroll to 2. Select Calls and press OK. 3. Select Speed dial and press OK. 4. Select A and press . 5. Select an entry from the phonebook and press OK. 6. Repeat to add speed dial entries for buttons B, 0, 2–9. To change contact, select an existing entry and press Options, then select Edit or Delete and press OK. To speed dial an entry from standby, press and hold corresponding button.
English 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call time and press OK. Select one of the following options and press OK. Last call Outgoing calls Received calls Reset all Show the elapsed time of the most recent call. Show the elapsed time of all dialled calls. Show the elapsed time of all received calls. Press Yes to reset the timer, or No to discard changes.
English Call waiting You can handle more than one call at a time. An alert tone will be heard if there is an incoming call while talking. To put the current call on hold and answer the incoming call, press Options, select Answer and then OK. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call setup and press OK. Select Call waiting and press OK. Select one of the following options and press OK. Activate Deactivate Query status Enables call waiting.
English Note! A password is needed to apply Call barring. Contact your service provider to get the password. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call setup and press OK. Select Call barring and press OK. Select one of the following options and press OK. Outgoing calls All calls Internat.calls Int. except home Incoming calls All calls When roaming Cancel all Press OK then select: User can answer incoming calls but not dial out.
English SMS settings Memory status Displays the percentage of memory space used on the SIM card and in the phone memory. Phone memory can store up to 200 messages. Storage 1. Select SIM (default) to store messages on the SIM card, or Phone to store messages in the phone memory. 2. Press OK. SMS centre This number is needed to use the message function. The number to your service centre is supplied by your service provider and is usually set on the SIM card.
English MMS settings Memory status Displays the percentage of memory space used in the phone memory. Storage Picture messages / MMS are saved by default in the phone memory. When the memory becomes full you will need to either delete a picture message (see Delete, p.17) or select to save your picture messages on the memory card (you will need to buy and insert a memory card of your own*). When the memory is full you will see a message saying No memory when you try to send or receive a picture message.
English Account name APN User name Password Homepage Connection type Proxy address Proxy port User name Password 3. 4. 5. Add account name. Add APN (Access Point Name). Add user name. Add password. Add homepage. Use the side buttons +/- to select connection type HTTP or WAP. Add proxy address. Add proxy port. Add proxy user name. Add proxy password. Press OK and press Yes to save or No to exit without saving. Select your new profile and press Options. Select Activate and press OK.
English Reminder The SMS reminder alerts you once if you haven't checked your text message within 10 minutes from receipt. If notification envelope is removed by pressing , no reminder will be heard. Select Reminder and press On/Off to enable/disable. Vibration The SMS vibration alert is several short vibrations that continues for either Short (4 seconds) or Long (12 seconds). Note! If Alert type is set to Ring only the phone will not vibrate.
English EV information EV/Light sensitivity can be adjusted by pushing volume keys up & down when in camera mode. Image size Select one of the following options Wallpaper (lowest quality), 320x240 (QVGA) or 640x480 (VGA) (highest quality). Note! With higher quality (more megapixels), less pictures can be stored in memory. Shutter sound Select one of the following options Off, Low or High. Assistance Settings for the Assistance button function. 1. 2. Press Menu, scroll to and press OK.
English To edit or delete an existing entry, select it and press Options, then select Edit or Delete and press OK. SMS The message to be sent to the contacts in numbers list when the Assistance button is pressed. Activation Select one of the following options and press OK. On Off The phone sends a text message before dialling. The phone dials without sending a message first. Message Press Edit and enter the message and then press OK to confirm.
English High Low Silent Loud signals (default). One low signal. No sound indication, like a normal call. Alarm info Please read this important safety information before enabling the assistance function: Be careful about including numbers with automatic answering in the call list, as the alarm sequence stops once the call is answered. Note! This information is not applicable if Confirm with "0" is set to On.
English Search device Search for available Bluetooth audio devices. If Bluetooth is not enabled you can enable it now by pressing Yes. 1. 2. Select from the list of devices and press Bond to connect. When connecting to another Bluetooth device you need a shared password. Enter the password and press OK. My device Lists saved devices and enables you to add new devices. Select device from the list and press Options.
English On Off Automatic PIN code activated, you need to enter the PIN code every time the phone is started. PIN code deactivated. Warning, if SIM card is lost/stolen it is unprotected. You do not need to enter the PIN code when the phone is started, the phone remembers it automatically. If SIM card is moved to another phone (lost/stolen), the PIN code needs to be entered to unlock. Note! You need to input the current PIN code to disable/enable SIM lock.
English 3. 4. 5. Select Phonebook to add a contact from the Phonebook. Alternatively, press Manual. . Press Enter the number and press OK. Repeat until you have 5 contacts (maximum). To edit or delete an existing entry, select it and press Options, then select View, Edit or Delete and press OK. Fixed dial (FDN) You can limit calls to certain numbers saved on the SIM card. The list of allowed numbers is protected by your PIN2-code. Mode Fixed numbers Select On/Off and press OK. Enter PIN2.
English Reset all If you select Reset all, your phones settings and content, such as contacts, number lists and messages, will be deleted from the phone memory (SIM memory is not affected). Input the phone password and press OK to reset. Note! The default Phone code is 1234. Additional functions Alarm 1. 2. 3. 4. 5. 6. 7. and press OK. Press Menu, scroll to Select On and press OK. Enter the alarm time using the keypad, then press OK. For a single occurrence, select Single and press OK.
English Add task 1. Enter 2. Enter 3. Enter 4. Press date for the task, then press time for the task, then press subject. OK. . . Jump to date Enter the date and press OK. View all Select a task and press Options for the following options: Edit Delete Delete all Edit selected task. Delete selected task. Delete all tasks. Note! The calendar will work even when the phone is switched off. Do not press Yes to power on if mobile phone use is prohibited or when it may cause interference or danger. 1. 2.
English 3. 4. 5. Use the arrow buttons to select an operation (+, -, x, ÷) and press OK. Enter the next number and press OK. Repeat steps 2–4 as necessary. Select = and press OK to calculate the result. FM radio The FM radio has a frequency range from 87.5 to 108.0 MHz and 9 preset channels. Turning the radio on . 1. Connect the headset to the headset socket 2. Press Menu, scroll to and press OK. The radio is turned on. or The tuned frequency is displayed. Select channel using .
English 4. 5. Select the channel you wish to edit and press Options or Add. Select one of the following options and press OK. Play Delete Edit Play the selected channel. Delete the channel. Press Yes to confirm or No to return to the channel list. Edit the channel name, then press to edit the frequency, use # to enter the decimal point. Press Save. Selecting channels Press keys 1-9 to quick-select a preset channel while the radio is playing. Manual input (changing search mode) 1. 2. 3. 4.
English All contacts sent to Doro PhoneEasy 607 by remote configuration are stored in the Phone (even if storage is set to SIM). ® 3 phone numbers for each contact Mobile, Home or Office. Note! SMS format must be *#Command#, otherwise the SMS cannot be identified as a remote control command. Parameters are the content you want to send and you must use # sign to separate two parameters. In tables P = Parameters. Setting a contact in the phonebook Command P1 P2 P3 P4 phonebook name max.
English Note! Only use numerals for parameters 2, 3 and 4. If you use letters in these parameters it will be stored as empty/blank in the Phonebook. Contacts already saved in the Phonebook, will not be replaced. They will be duplicated. This is to avoid unintentional removal of contacts from the Phonebook. Tip: When storing international numbers, always use + before the country code for best operation. Enter the phone number including the area code.
English *#alert#n#1#Jeff Jackson#0700393939# You want the SMS message to be sent out when the assistance button is pressed. Example of content in text message: This is an assistance message. Please take appropriate actions. *#alert#m#1#This is an assistance message. Please take appropriate actions.# You want to turn on the function Confirm with "0". *#alert#c#1# You want to set the Signal type to low. *#alert#s#1# Tip: Remember to write down the positions you send.
English *#memorykey#b#Martha Thomson#0768991014# *#memorykey#c#Steve Lewis#0709441819# Add task to calendar Command P1 P2 P3 task yyyymmdd Date hhmm Time note description of task. max. length = 35 Example 1: You want to send a new calendar task to Doro PhoneEasy 607. It is for a dentist appointment on December 1, 2010 at 10:30.
English Troubleshooting Phone cannot be switched on Battery charge low Battery incorrectly installed Connect the power adapter and charge the battery for 3 hours. Full battery capacity is reached after the battery has been charged 3–4 times. Check the installation of the battery. Failure to charge the battery Battery or charger Check the battery and charger. damaged Battery should only be Improve the charging environment.
English SIM card error SIM card damaged SIM card incorrectly installed SIM card dirty or damp Check the condition of the SIM card. If it is damaged, contact your service provider. Check the installation of the SIM card. Remove the card and reinstall it. Wipe the contact surfaces of the SIM card with a clean cloth. Failure to connect to network SIM card invalid No coverage of GSM service Contact your service provider. Contact your service provider.
English Safety instructions CAUTION The unit and the accessories can contain small parts. Keep all of the equipment out of the reach of small children. The mains adapter is the disconnect device between the product and mains power. The mains socket outlet must be close to the equipment and easily accessible. Network services and costs Your device is approved for use on the GSM 900/1800/1900 MHz networks. To use the device, you need a subscription with a service provider.
English pacemaker to avoid potential interference with the pacemaker. Persons with pacemakers: • • • Should always keep the phone more than 15 cm from their pacemaker when the phone is turned on. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn the phone off immediately.
English WARNING Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds while driving may distract your attention and cause an accident. Listen to a headset at a moderate level, and do not hold the device near your ear when the loudspeaker is in use.
English Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. • • • • • • • Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. Do not use or keep the unit in dusty, dirty environments.
English Weight: 102 g (including battery) Battery: 3.7 V / 800 mAh Li-ion battery Bluetooth is a registered trademark of Bluetooth SIG, inc. ® eZiType is a trademark of Zi Corporation. ™ vCard is a trademark of the Internet Mail Consortium. Specific Absorption Rate (SAR) This device meets applicable international safety requirements for exposure to radio waves. Doro PhoneEasy 607 measures 0.468 W/kg measured over 10 g tissue. ® The maximum limit according to WHO is 2.
PhoneEasy 607 (1011) LAST PAGE English Version 1.0 © 2013 Doro AB. All rights reserved. www.doro.
