Doro PhoneEasy 605 ® English
A 1 4 GHI 7 PQRS B C 2 ABC 5 JKL 8 TUV 0 3 DEF 6 MNO 9 WXYZ
English 1. Earpiece 2. Left soft key 3. Call key 4. Microphone 5. Speed dial 6. 7. 8. 9. 10. 1 / Voice mail # / Silent / Input method SMS shortcut Arrow keys End call/Power on/off 11. Right soft key 12. LED light, Battery level low/charging 13. LED light, New message/Missed call 14. Emergency key 15. Charging socket 16. Headset socket 17. Battery cover 18. Volume control 19. Loudspeaker 20.
English Contents Installation ................................................................................ 1 Installing the SIM card and the battery .................................. 1 Charging .................................................................................... 2 Symbols .................................................................................... 3 Assistive functions ............................................................... 3 Phone indicators ...........................
English Display................................................................................23 Calls ...................................................................................25 Messages ............................................................................29 Emergency ......................................................................31 Security ..............................................................................33 Additional functions........................................
English Installation IMPORTANT! Turn off the phone and disconnect the charger before removing the battery cover. Installing the SIM card and the battery The SIM card holder is located behind the battery. 1 1. 2. 3. 4. 2 3 4 Remove the battery cover and the battery if it is already installed. Insert the SIM card by gently sliding it into the holder. Make sure that the SIM card’s contacts are facing inwards and that the cut off corner is pointing downwards.
English Charging CAUTION Only use batteries, charger and accessories that have been approved for use with this particular model. Connecting other accessories may be dangerous and may invalidate the phone's type approval and guarantee. When the battery is running low, is displayed and a warning signal is heard. To charge the battery, connect the mains adapter to a wall socket and to the charging socket y. is displayed briefly when the charger is connected to the phone, when it is disconnected.
English Symbols Assistive functions The following symbols indicate information in the manual about assistive functions for: Seeing Handling Hearing Safety Phone indicators 5 flashes when you have a new message or a missed call. After reading the new message/missed call, the envelope will stop flashing. ] flashes when the battery is running low and during charging.
English Message sending success Headset out Message sending failed Speaker on Error Speaker off Warning Incoming call Query Outgoing call Done (confirmed) Call ended New message Missed call. Press Read to see the missed calls.
English Operation Activating the phone on the phone to turn it on/off. Press and hold the red button Confirm with Yes to power off. The following messages may be displayed: SIM card missing or incorrectly inserted. SIM card damaged or not valid. If the SIM card is valid but protected with a PIN code (Personal Identification Number), PIN: is displayed. Enter the PIN code and press OK (left soft key1 ). Delete with Clear (right soft key).
English Changing the language, time and date The default language is determined by the SIM card. See Settings/General, p.19 on how to change language, time and date. Making a call 1. 2. 3. Enter the phone number including the area code. Delete with Clear. to dial. Press Abort to cancel dialling. Press to end the call. Press Tip: For international calls, always use + before the country code for best operation. Press * twice for the international prefix +. Making a call from the phonebook 1. 2. 3.
English Volume control Use the side keys +/– to adjust the sound volume during a call. The volume level is indicated on the display. If you use hearing aid or have hearing difficulties when using the telephone in noisy environment, you can customize the phone's audio settings, see Settings/Sound/Audio setup , p.22. Entering text Press a numerical key repeatedly until the desired character is shown. Wait a few seconds before entering the next character. Press * for a list of special characters.
English Entering text manually If none of the suggested words are correct, press # to change to manual input mode. The icon on the top left of the display indicates the input mode: Abc ABC abc Abc ABC abc 123 Sentence case with predictive text UPPER CASE with predictive text lower case with predictive text Sentence case UPPER CASE lower case Numerals Note! The selected menu language determines the available input methods.
English Call options Options (left soft key) A menu with the following options is displayed: Hold single call/Retrieve single End single call New call Phonebook Msg centre Mute Hold/retrieve the current call. End the current call (same as ). Call another number (Conference). Search the phonebook. Write or read SMS messages. Disable the microphone. SPK on (right soft key) CAUTION Do not hold the device near your ear when the handsfree mode is in use, because the volume may be extremely loud.
English Call information During a call, the outgoing or incoming phone number and the elapsed call time is displayed. If the identity of the caller is withheld, Unknown is displayed. Speed dial A, B, C and the numerical keys 0 and 2–9 can be used for speed dialling. To speed dial an entry from standby, press and hold the corresponding key. See also Settings/Calls/Speed dial , p.26.
English Emergency key CAUTION When an emergency call is activated the phone is pre-set to handsfree mode. Do not hold the device near your ear when the handsfree mode is in use, because the volume may be extremely loud. The Emergency key allows you easy access to contact predetermined numbers should you need help. To make an emergency call, press and hold the Emergency key on the back of the phone for 3 seconds, or press it twice within 1 second.
English Note! Some private security companies can accept automatic calls from their clients. Always contact the security company before using their phone number. IMPORTANT! Information to the recipient of an Emergency call, when Confirm with "0" is activated: • • • • After receiving the emergency message, each number in the Numbers list will be called sequentially. To confirm the emergency call, the recipient need to press 0.
English Phonebook The phonebook can store 100 entries with 3 phone numbers in each entry. Creating a phonebook entry 1. 2. and press OK. Press Menu, scroll to Select -New contact- and press Add. 3. Name for the contact, see Entering text , p. 7 . Enter a Delete with Clear. / to select Mobile, Home or Office, and enter Use the phone number(s) including the area code. Press Save. to return to standby mode. Press 4. 5. 6.
English Call Press OK to call the contact. Send SMS Press OK to write a SMS message, see Creating and sending messages, p.16. Delete Press OK to delete the selected phonebook entry. Press Yes to confirm or No to abort. Delete all Select From SIM or From phone and press OK to delete all phonebook entries from the SIM card or phone memory. Enter the phone code and press OK to confirm. The default phone code is 1234.
English ICE (In Case of Emergency) First responders can access additional information such as medical information from the victim's phone in case of emergency. In the event of a trauma, it is critical to have this information as early as possible to increase the chances of survival. All fields are optional, but the more information provided the better. 1. 2. 3. Press Menu, scroll to and press OK. and press OK, then use / to scroll the list of Select entries.
English Messages Creating and sending messages 1. 2. 3. 4. 5. 6. or press Menu, scroll to and Press the shortcut key press OK. Select Write message and press OK. , p. 7 , then press To. Type your message, see Entering text Select a recipient from the Phonebook and press OK. Alternatively, select Enter number to add recipient manually. Enter the phone number and press OK. Press Add to add more recipients or Send to send the message.
English Call Press OK to call the contact. Delete Press Yes to delete the message, or No to return. Edit Edit the message, then press Send. Forward Forward a message. Edit the message (if desired), then press Send. Use number Displays all phone numbers contained in the message as well as the sender's number. Select one of the displayed numbers and press Options for following options: Call Save Send SMS Call the selected number. Save the number in the phonebook. Write a new SMS message.
English Call log Received, missed, and dialled calls are saved in a combined call log. 20 calls of each type can be stored in the log. For multiple calls related to the same number, only the most recent call is saved. Retrieving and dialling 1. Press 2. and press OK. Alternatively, press Menu, scroll to / to scroll through the Call log. Use . Received call Dialled call Missed call 3.
English Settings Note! The settings described in this chapter are carried out in standby mode. to return to standby mode. Press General Time & date Setting the time and date 1. Press Menu, scroll to and press OK. 2. Select General and press OK. 3. Select Time & date and press OK. 4. Select Set time and press OK. 5. Enter the time (HH:MM), then press OK. 6. Select Set date and press OK. 7. Enter the date (DD/MM/YYYY), then press OK. Setting the time/date format and press OK. 1. Press Menu, scroll to 2.
English calendar. They are in local time. Updating may cause some alarms you have set to expire. Depending on network support and subscription. Language The default language for the phone menus, messages etc. is determined by the SIM card. You can change this to any other language supported by the phone. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select General and press OK. Select Language and press OK. / to select a language, then press OK.
English with your service provider. Contact your service provider for more information. 1. 2. 3. 4. and press OK. Press Menu, scroll to Select General and press OK. Select Network setup and press OK. Select one of the following options and press OK to confirm: Automatic Manual Network is selected automatically. A list of available network operators is displayed (after a short delay). Select desired operator and press OK.
English Audio setup If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment, you can customize the phone's audio settings. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Audio setup and press OK. Select one of the following options and press OK: Normal Medium High For normal hearing in normal conditions. For mild hearing impairment or usage in noisy environment.
English Ringtone volume 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Volume and press OK. / to change the ring volume, then press OK. Use Alert type Incoming calls can be signalled by a ring tone and/or vibration. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Alert type and press OK. / to select signalling mode, then press OK. Use Ring only Vib. only Vib & ring Vib->ring Ring tone only. Vibration only. Vibration and ring tone.
English 3. 4. 5. Select Wallpaper and press OK. / to display available wallpapers. Use Press OK to confirm or Back to discard changes. Text size You can customize the text size for messages and the phonebook. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Display and press OK. Select Text size and press OK. Select Normal or Large and press OK. Idle display In standby mode the display can show clock only, clock and the service provider, or all information. 1. 2. 3. 4.
English Brightness You can customize the phone's brightness settings. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Display and press OK. Select Brightness and press OK. Select Level 1 – Level 3 and press OK. Calls Voice mail If your subscription includes an answering service, callers can leave a voice mail message when you cannot answer a call. Voice mail is a network service and you may need to subscribe to it first.
English Speed dial A, B, C and the numerical keys 0 and 2–9 can be used for speed dialling. Adding speed dial numbers 1. Press Menu, scroll to and press OK. 2. Select Calls and press OK. 3. Select Speed dial and press OK. 4. Select A and press Add. 5. Select an entry from the phonebook and press OK. 6. Repeat to add speed dial entries for keys B, C, 0, 2–9. To change contact, select an existing entry and press Options, then select Edit or Delete and press OK.
English Call time During a call, the duration of the call is shown. You can check the duration of your calls. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call time and press OK. Select one of the following options and press OK: Last call Dialled calls Received calls Reset all Show the elapsed time of the most recent call. Show the elapsed time of all dialled calls. Show the elapsed time of all received calls.
English Set by network Hide ID Send ID Use default setting by the network. Never show your number. Always show your number. Call waiting You can handle more than one call at a time. An alert tone will be heard if there is an incoming call while talking. To put the current call on hold and answer the incoming call, press Options, select Answer and then OK. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call setup and press OK. Select Call waiting and press OK.
English Call barring Your phone can be restricted to disallow certain types of calls. Note! A password is needed to apply Call barring. Contact your service provider to get the password. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call setup and press OK. Select Call barring and press OK. Select one of the following options and press OK: Outgoing calls Press OK then select: User can answer incoming calls but not dial out.
English Delete Select Delete Inbox to delete all messages in Inbox. Press Yes confirm or No to discard changes. Select Delete Outbox to delete all messages in Outbox. Press Yes confirm or No to discard changes. Select Delete all to delete all messages at the same time. Press Yes confirm or No to discard changes. Memory status Displays the percentage of memory space used on the SIM card and in the phone memory. Phone memory can store up to 450 messages. Storage 1. 2.
English Select Reminder and press On/Off to enable/disable. Profile set This number is needed to use the message function. The number to your service centre is supplied by your service provider and is usually set on the SIM card. If the service centre number is saved on the SIM card it is shown. If not, you can enter the number yourself. Contact your service provider for more information. 1. 2. Press Edit and enter the service centre number. Press Clear to delete. Press Save to save the new number.
English On Normal On (3) Off To activate, press and hold key for approximately 3 seconds, or press 2 times within 1 second. To activate, press key 3 times within 1 second. Emergency key disabled. Numbers list The list of numbers that will be called when the Emergency key is pressed. 1. 2. 3. Select Empty and press Add. Select Phonebook to add a contact from the phonebook. Alternatively, press Manual. See Phonebook, p.13 on how to add names/numbers. Press Save to confirm.
English Off The phone will dial the first number on the list. If the call is not answered within 25 seconds, the next number is dialled. Dialling is repeated 3 times or until the call is answered, or until is pressed. The function will work as above AND: If the recipient doesn’t press 0 within 60 seconds the call will be disconnected and the next number in sequence will be called.
English On Off Automatic PIN code activated, you need to enter the PIN code every time the phone is started. PIN code deactivated. Warning, if SIM card is lost/stolen it is unprotected. You do not need to enter the PIN code when the phone is started, the phone remembers it automatically. If SIM card is moved to another phone (lost/stolen), the PIN code needs to be entered to unlock. Note! You need to input the current PIN code to disable/enable SIM lock.
English 3. 4. 5. Select Phonebook to add a contact from the Phonebook. Alternatively, press Manual. . Press Enter the number and press Save. Repeat until you have 5 contacts (maximum). To edit or delete an existing entry, select it and press Options, then select View, Edit or Delete and press OK. Fixed dial (FDN) You can limit calls to certain numbers saved on the SIM card. The list of allowed numbers is protected by your PIN2-code. Mode Fixed numbers Select On/Off and press OK.
English Reset all If you select Reset all, your phone's settings and content, such as contacts, number lists and messages, will be deleted in phone memory (SIM memory is not affected). Input the phone password and press OK to reset. Note! The default Phone code is 1234.
English Additional functions Alarm 1. 2. 3. 4. 5. 6. 7. and press OK. Press Menu, scroll to Select On and press OK. Enter the alarm time using the keypad, then press OK. For a single occurrence, select Single and press OK. For a repeated alarm, select Repeated and press OK. Scroll through the list of weekdays and press On/Off to enable/disable the alarm for each weekday, then press Save. To edit an alarm, press Edit, then press OK. To stop the alarm, press Off. The alarm is now deleted.
English Jump to date Enter the date and press OK. View all Select a task and press Options for the following options: Edit Delete Delete all Edit the selected task Delete the selected task Delete all tasks Note! The calendar will work even when the phone is switched off. Do not press Yes to power on if wireless phone use is prohibited or when it may cause interference or danger. Calculator The calculator can perform basic mathematical operations. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK.
English Instructions for the REMOTE USER Sending remote control commands by text message. Activation must be set to On and the remote user must be entered in Numbers list on the Doro PhoneEasy 605. ® Menu Security Remote config. All contacts sent to Doro PhoneEasy 605 by remote configuration are stored in the Phone (even if storage is set to SIM). ® 3 phone numbers for each contact Mobile, Home or Office.
English Jeff Jackson 0700393939 0462805011 0462805083 Note! Only use numerals for parameters 2, 3 and 4. If you use letters in these parameters it will be stored as empty/blank in the Phonebook. Contacts already saved in the Phonebook, will not be replaced. They will be duplicated. This is to avoid unintentional removal of contacts from the Phonebook. Tip: When storing international numbers, always use + before the country code for best operation. Enter the phone number including the area code.
English Setting the emergency function Command alert alert alert alert alert P1 a activation P2 0/1/2 0=Off 1=On Normal 2=On (3) n 1–5 number location in Numbers list m 0/1 message 0=Off 1=On c 0/1 confirm with 0=Off “0” 1=On s 0/1/2 signal type 0=High 1=Low 2=Silent P3 P4 Name max. length=30 Text max. length=70 number max. length=40 Example: You want to activate the emergency function.
English Tip: Remember to write down the positions you send. This way it is easier for you to later send changes. Setting the one touch memories P4 Command P1 P2 memorykey a A key memorykey b B key memorykey c C key Name number max length = max length = 40 30 Name number max length = max length = 40 30 Name number max length = max length = 40 30 Example: You want to set Jeff Jackson’s mobile number in memory key A in Doro PhoneEasy 605.
English Troubleshooting Phone cannot be switched on Battery charge low Battery incorrectly installed Connect the power adapter and charge the battery for 3 hours. Full battery capacity are reached after the battery has been charged 3–4 times. Check the installation of the battery. Failure to charge the battery Battery or charger Check the battery and charger. damaged Battery should only be Improve the charging environment.
English SIM card error SIM card damaged Check the condition of the SIM card. If it is damaged, contact your service provider. Check the installation of the SIM card. Remove the card and reinstall it. Wipe the contact surfaces of the SIM card with a clean cloth. SIM card incorrectly installed SIM card dirty or damp Failure to connect to network SIM card invalid No coverage of GSM service Contact your service provider. Contact your service provider.
English Network services and costs Your device is approved for use on the GSM 900/1800/1900 MHz networks. To use the device, you need a subscription with a service provider. Using network services may result in traffic costs. Some product features require support from the network, and you may need to subscribe to them. Operating environment Follow the rules and laws that apply wherever you are, and always turn off the unit whenever its use is prohibited or can cause interference or hazards.
English Areas with explosion risk Always turn off the unit when you are in an area where there is a risk of explosion. Follow all signs and instructions. There is a risk of explosion in places that include areas where you are normally requested to turn off your car engine. In these areas, sparks can cause explosion or fire which can lead to personal injury or even death. Turn off the unit at filling stations, and any other place that has fuel pumps and auto repair facilities.
English WARNING Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds while driving may distract your attention and cause an accident. Listen to a headset at a moderate level, and do not hold the device near your ear when the loudspeaker is in use.
English Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. • • • • • • • Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. Do not use or keep the unit in dusty, dirty environments.
English Weight: 103 g (including battery) Battery: 3.7 V / 800 mAh Li-ion battery eZiType is a trademark of Zi Corporation. ™ vCard is a trademark of the Internet Mail Consortium. Hearing aid This device should work with most hearing aid equipment in the market. However, full compatibility with all equipment can not be promised. Specific Absorption Rate (SAR) This device meets applicable international safety requirements for exposure to radio waves. Doro PhoneEasy 605 measures 0.
English 50
LAST PAGE English Version 2.2 © 2012 Doro AB. All rights reserved. www.doro.
