Doro PhoneEasy 611 ® English
17 18 19
English 1. Earpiece 2. Camera shortcut 3. Left selection button 4. Call button 5. Speed dial 6. Voice mail 7. Silent/Input method 8. Microphone 9. SMS shortcut 10. Arrow buttons 11. End call/Power on/off 12. Right selection button 13. 14. 15. 16. 17. 18. 19. 20. 21.
English Contents Installation ................................................................................ 1 Installing the SIM card, memory card and the battery ............. 1 Charging .................................................................................... 3 Symbols .................................................................................... 4 Assistive functions ............................................................... 4 Phone indicators ...................................
English Camera, options...................................................................21 Camera adjustments.............................................................21 Image viewer..............................................................................22 Image viewer, options...........................................................22 Connecting the phone to a computer ............................................23 Drag and drop content between phone and a computer ...........
English Hearing aid .........................................................................61 Specific Absorption Rate (SAR) .............................................61 Declaration of Conformity .....................................................
English Installation IMPORTANT! Turn off the phone and disconnect the charger before removing the battery cover. Installing the SIM card, memory card and the battery The SIM and memory card holders are located inside the battery compartment. GB S IM 1 1. 2. 3. 4. 2 4 3 Remove the battery cover and the battery if it is already installed. Insert the SIM card by gently sliding it into the holder.
English IMPORTANT! Use only compatible memory cards for use with this device. Compatible card type: microSD, microSDHC. Incompatible cards may damage the card itself, the device and corrupt data stored on the card. Depending on the market some phones may have a pre-installed memory card.
English Charging CAUTION Only use batteries, charger and accessories that have been approved for use with this particular model. Connecting other accessories may be dangerous and may invalidate the phones type approval and guarantee. When the battery is running low, is displayed and a warning signal is heard. To charge the battery, connect the mains adapter to a wall socket and to the charging socket y. is displayed briefly when the charger is connected to the phone, and when it is disconnected.
English Symbols Assistive functions The following symbols indicate information in the manual about assistive functions for: Seeing Handling Hearing Safety Phone indicators LED light on the phone will: • • flash green when you have a new message or a missed call. After reading the new message/missed call, the flashing will stop. flash red when the battery is running low and during charging.
English Display main symbols Mute Charger connected Message sending successful Charger removed Message sending failed Headset in Error Headset out Warning Speaker on Query Speaker off Done (confirmed) Incoming call New message Outgoing call Battery level low Call ended Searching Missed call. Press Read to see the missed calls.
English Operation Activating the phone Press and hold the red button Confirm with Yes to power off. on the phone to turn it on/off. If the SIM card is valid but protected with a PIN code (Personal Identification Number), PIN is displayed. Enter the PIN code and press OK ( upper left corner of keypad). Delete with Clear ( upper right corner of keypad). Note! If PIN and PUK codes were not provided with your SIM card, please contact your service provider.
English Changing the language, time and date The default language is determined by the SIM card. See General, p.24 on how to change language, time and date. Making a call 1. 2. 3. Enter the phone number including the area code. Delete with Clear. Press to dial. Press Abort to cancel dialling. Press to end the call. Tip: For international calls, always use + before the country code for best operation. Press * twice for the international prefix +. Making a call from the Phonebook 1. 2. 3.
English environment, you can customise the phones audio settings, see Audio setup , p.28. Entering text Press a numerical key repeatedly until the desired character is shown. Wait a few seconds before entering the next character. Press * for a list of special characters. Select the desired character with / and press OK to enter it. Use the side keys +/– or / to move the cursor within the text. Press # to cycle upper case, lower case and numerals. Press and hold # to change input language.
English Call options During a call the selection buttons1 ( functions: ) give access to additional Options (left selection button) A menu with the following options is displayed: Hold single call/Retrieve single End single call New call Phonebook Messages Mute Hold/retrieve the current call. End the current call (same as ). Call another number (Conference). Search the phonebook. Write or read SMS messages. Disable the microphone.
English Tip: Call waiting must be activated, see Call setup, p.33. Call information During a call, the outgoing or incoming phone number and the elapsed call time is displayed. If the identity of the caller is withheld, Unknown is displayed. Speed dial You can use keys A, B and C and you can also use the numerical keys 0 and 2–9. To speed dial an entry from standby, press and hold the corresponding key. See Speed dial , p.32.
English Assistance button IMPORTANT! Always inform recipients in the Number list that they are listed as your assistance contacts. CAUTION When an assistance call is activated the phone is pre-set to handsfree/speakerphone mode. Do not hold the device near your ear when the handsfree mode is in use, because the volume may be extremely loud. The Assistance button allows easy access to contact your predefined help numbers (Number list) should you need help.
English Note! Some private security companies can accept automatic calls from their clients. Always contact the security company before using their phone number. IMPORTANT! Information to the receiver of an assistance call, when Confirm with "0" is activated: • • • • After receiving the assistance message, each number in the Number list will be called sequentially. To confirm the assistance call, the receiver needs to press 0.
English Phonebook The phonebook can store 300 entries with 3 phone numbers to each entry. Creating a phonebook entry 1. 2. Press Menu, scroll to and press OK. Select -New contact- and press Add. 3. Enter a Name for the contact, see Entering text , p. 8 . Delete with Clear. Use / to select Mobile, Home or Office, and enter the phone number(s) including the area code. 4. 5. Select Picture and press Edit to associate a picture to the contact.
English 2. 3. Select a contact and press Options. Select one of the following options and press OK. View Show details for the selected contact. Edit 1. 2. Use / to move the cursor. Delete with Clear. Press Save. Add See Creating a phonebook entry, p.13. Call Press OK to call the contact. Send SMS Press OK to write a SMS message, see Creating and sending SMS, p.16. Send MMS Press OK to write a MMS message, see Creating and sending MMS, p.17.
English Select From phone and press Select to copy all phonebook entries from the phone memory to the SIM card. Press Yes to confirm or No to abort. Send vCard Select Send by SMS and press OK to send the selected phonebook entry as a vCard via SMS. Enter the phone number of the recipient. Alternatively use the arrow keys / to scroll through the phonebook, or quick search by pressing the key corresponding to the first letter of the entry, see Entering text , p. 8 . Press OK to send.
English Insurance: Contact 1: Contact 2: Doctor: Condition: Allergies: Blood type: Vaccination: Medication: Other info: Your insurance provider and policy number. Press Options and then OK to Add or Delete a contact from the phonebook, or Save to accept the current entry. If possible, add your relationship to your ICE contacts in the phonebook, such as “ICE Wife Mary Smith”. Any medical conditions/medical devices (e.g. diabetic, pacemaker). Any known allergies (e.g. penicillin, bee stings).
English Note! If you choose to add multiple recipients, you will be charged for each recipient (maximum 10). For international calls, always use + before the country code for best operation. Press * twice for the international prefix +. Creating and sending voice message A voice message use the same technology as an MMS. Both you and the recipient must have subscriptions that support MMS. The settings for MMS is supplied by your service provider and can be sent to you automatically via SMS.
English 2. 3. 4. 5. Select MMS and press OK. Type your message, see Entering text , p. 8 , then press Options. Add items to your message from the options Add subject, Add picture, Add sound and Add video. Add recipients with To and Send when ready. Add subject 1. 2. Select Add subject and press OK. Type your subject, then press Done. Add picture 1. 2. 3. 4. 5. Select Add picture and press OK.
English Add recipients (To) Select To and press OK to select recipient from Phonebook and press Add. Alternatively, select Enter number and press Select to add recipient manually and press Done. Select Add to add more recipients or select Send to send and then press OK. You can also modify the recipients by selecting one and press Options to Edit, Delete or Delete all. 1. 2. 3. Inbox, Sent, Outbox / SMS/MMS unread / SMS/MMS sent / SMS/MMS read / SMS/MMS unsent 1. 2. 3. 4.
English Edit Edit the message, then press Send. Forward Forward a message. Edit the message (if desired), then press Send. Use number Displays all phone numbers contained in the message as well as the sender's number. Call Save Send SMS Send MMS Call the selected number. Save the number in the Phonebook. Write a new SMS message. Write a new MMS message. Save objects (MMS only) To save text and media objects such as pictures, sound recordings and video.
English 3. Press settings: View Delete Delete all Save to dial the number or press Options for the following Show details for the selected call. Delete the call. Delete all calls in the Call log. Save the number in the Phonebook. Camera (take photos) To get sharp photos, wipe the lens clean with a dry cloth. 1. 2. 3. Press shortcut or press Menu, scroll to and press OK. Press to take photo. Press Options or Back (if you do not make any selection the picture is saved).
English • Use the side buttons +/– to adjust EV/Light sensitivity. Note! Zoom may reduce image quality. For more camera settings, see Camera, p.39. Image viewer View your saved images. 1. 2. 3. Press Menu, scroll to and press OK. Select an image, then press Options. Select one of the following options and press OK. Image viewer, options View Single view. Press Back when done. Send Select an option, then press OK: Send by MMS Send by Bluetooth Send image as MMS.
English Rename Rename image. Delete with Clear and press Done to confirm. Browse style You can change image view. Default is Large, you can also select List or Medium. In List the file name, the date and the size of the image is shown. Sort by Select if you want to sort your images by Name or Time. Storage Select where the phone should save files if you have memory card installed. Delete all Press OK to delete all images. Press Yes to confirm or No to return.
English Drag and drop content between phone and a computer 1. 2. 3. Connect your phone to a computer using a USB cable. Wait until the phone/memory card appears as external disks in the file explorer. Drag and drop selected files between the phone and the computer. Note! When the phone/memory card is mounted to the computer, the phone cannot access the memory card. Some functionality and applications in the phone, such as the camera, may not be accessible.
English 6. 7. Select Set date and press OK. Enter the date (DD/MM/YYYY), then press OK. Setting the time/date format 1. Press Menu, scroll to and press OK. 2. Select General and press OK. 3. Select Time & date and press OK. 4. Select Set format and press OK. 5. Select Time format and press OK. 6. Select 12 hours or 24 hours and press OK. 7. Select Date format and press OK. 8. Select the desired date format and press OK. Setting Auto time on/off 1. Press Menu, scroll to and press OK. 2.
English Press Yes to change Language, Time & date, Ring tone, Volume, Text size. Press No if you do not want to change. Owner number The phone numbers assigned to your SIM card are saved if this is allowed by the card. To view/edit the numbers: 1. 2. 3. Press Menu, scroll to and press OK. Select General and press OK. Select Owner number and press OK. See Phonebook, p.13 on how to add names/numbers.
English Select network To view available networks, press Select network. A list of available network operators is displayed (after a short delay). Select desired operator and press OK. Network mode To select another network, select Network mode and then select one of the following options. Automatic Manual Network is selected automatically. Network is selected manually. Use Select network to select desired operator. Services This menu may contain pre-programmed services from your network provider.
English 3. 4. Select Phonebook picture and press OK. Select On or Off and press OK. Sound Note! Silent needs to be set to Off to access Tone setup, Volume, Alert type and Extra tone. See Silent, p.29. Audio setup If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment, you can customise the phones audio settings. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Audio setup and press OK.
English Silent 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Silent and press OK. Select On or Off and press OK. Tip: Press and hold shortcut button # to activate/deactivate Silent mode. Alert type Incoming calls can be signalled by a ring tone and/or vibration. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Alert type and press OK. Scroll / to select signalling mode, then press OK. Ring only Vib. only Vib. and ring Vib.
English Display Wallpaper You can select different display backgrounds. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Display and press OK. Select Wallpaper and press OK. Scroll / to display available wallpapers. Press OK to confirm or Back to discard changes. Text size You can customise the text size for messages and the phonebook. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Display and press OK. Select Text size and press OK. Select Normal or Large and press OK.
English 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Display and press OK. Select LCD backlight and press OK. Select 15 sec., 30 sec. or 1 min and press OK. Brightness You can customise the phones brightness settings. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Display and press OK. Select Brightness and press OK. Select Level 1–Level 3 and press OK.
English 5. Select Call voice mail and press OK to call the voice mailbox. Tip: Press and hold shortcut button 1 to call your voice mail. Speed dial A, B, C and the numerical keys 0 and 2–9 can be used for speed dialling. Adding speed dial numbers 1. Press Menu, scroll to and press OK. 2. Select Calls and press OK. 3. Select Speed dial and press OK. 4. Select A and press Add. 5. Select an entry from the phonebook and press OK. 6. Repeat to add speed dial entries for buttons B, C, 0, 2–9.
English 6. Press OK to save the selected entry, or press Back to discard changes. To delete a Top 10 entry, select the entry in the Top 10 list and press Options, then Delete. Call time During a call, the duration of the call is shown. You can check the duration of your calls. 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call time and press OK. Select one of the following options and press OK.
English 4. 5. Select Caller ID and press OK. Select one of the following options and press OK. Set by network Hide ID Send ID Use default setting by the network. Never show your number. Always show your number. Call waiting You can handle more than one call at a time. An alert tone will be heard if there is an incoming call while talking. To put the current call on hold and answer the incoming call, press Options, select Answer and then OK. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK.
English No reply If busy Cancel diverts Diverts incoming calls if unanswered. Diverts incoming calls if the line is busy. Do not divert calls. Call barring Your phone can be restricted to disallow certain types of calls. Note! A password is needed to apply Call barring. Contact your service provider to get the password. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call setup and press OK. Select Call barring and press OK.
English Write speed You can change the speed at which keypad characters repeat (before the cursor moves onto the next character). Select Fast, Normal or Slow and press OK. SMS settings Memory status Displays the percentage of memory space used on the SIM card and in the phone memory. Phone memory can store up to 200 messages. Storage 1. Select SIM (default) to store messages on the SIM card, or Phone to store messages in the phone memory. 2. Press OK.
English Languages Channel settings Select language On/Off and press Done. Select from which channels you want to receive/subscribe messages. Use the options Subscribe, Cancel subscription, Add, Edit and Delete to define your channels. MMS settings Memory status Displays the percentage of memory space used in the phone memory. Phone memory can store up to 100 messages. MMS profile These settings are needed to use the MMS function.
English User name Password 3. 4. 5. Add proxy user name. Add proxy password. Press OK and press Yes to save or No to exit without saving. Select your new profile and press Options. Select Activate and press OK. You can also activate/modify a MMS profile by selecting one and press Options to Activate/Edit/Delete the account. Note! Some service providers require you to send an MMS message before you will be able to receive one. Send a MMS with text only to activate the service.
English Delete Select Inbox to delete all messages in the Inbox. Press Yes confirm or No to discard changes. Select Outbox to delete all messages in the Outbox. Press Yes confirm or No to discard changes. Select Sent to delete all messages in Sent. Press Yes confirm or No to discard changes. Select Delete all to delete all messages at the same time. Press Yes confirm or No to discard changes. Camera 1. 2. 3. Press Menu, scroll to and press OK. Select Camera and press OK.
English On Normal On (3) Off To activate, press and hold button for approximately 3 seconds, or press twice within 1 second. To activate, press button 3 times within 1 second. Assistance button disabled. Number list The list of numbers that will be called when theAssistance button is pressed. 1. 2. 3. Select Empty and press Add. Select Phonebook to add a contact from the phonebook. Alternatively, press Manual. See Phonebook, p.13 on how to add names/numbers. Press OK.
English Off The phone will dial the first number on the list. If the call is not answered within 25 seconds, the next number is dialled. Dialling is repeated 3 times or until the call is answered, or until is pressed. The function will work as above AND: If the receiver doesn’t press 0 within 60 seconds the call will be disconnected and the next number in the sequence will be called.
English 2. Select Bluetooth and press OK for the following settings: Function on/off Select On/Off and press OK to enable/disable Bluetooth. Visibility Select On/Off to make your phone visible/invisible to other devices. Note! To prevent other devices from finding your device, select Off. Even if you select Off, paired devices can still detect your device. Device name Enter the name your phone should appear as for other Bluetooth devices and press OK.
English Security 1. 2. Press Menu, scroll to and press OK. Select Security and press OK. SIM lock The SIM card is protected with a PIN code (Personal Identification Number). The phone can be set to ask for the PIN code on startup. Select one of the following options and press OK. On Off Automatic PIN code activated, you need to enter the PIN code every time the phone is started. PIN code deactivated. Warning, if SIM card is lost/stolen it is unprotected.
English On Off Remote configuration enabled. Remote configuration disabled. Number list You need to add the name and number of the people who are allowed to send information from their phone to your Doro PhoneEasy 611. ® 1. 2. 3. 4. 5. Select Number list and press OK. Select Empty and press Add. Select Phonebook to add a contact from the Phonebook. Alternatively, press Manual. Press . Enter the number and press OK. Repeat until you have 5 contacts (maximum).
English 1. 2. 3. Enter the current code and confirm with OK. Enter a new code and confirm with OK. Enter the new code again and confirm with OK. Reset settings If you select Reset settings, the changes that you have made to the phone settings will be reset to default settings. Input the phone password and press OK to reset.
English View (photos/images) Single view. Press Back when done. Send Select an option, then press OK: Send by MMS Send by Bluetooth Send by MMS. Press OK to create a message, see Creating and sending MMS, p.17. Send to other Bluetooth devices, see Bluetooth®, p.41. Details View detailed information about the file, e.g. date, size, copyright-protection. Use Select an option from the list, then press OK. Wallpaper Phonebook picture Save as display background. Press OK. Send to a phonebook contact.
English 2. 3. 4. 5. Select Select Select Select Phone/Memory card and press Options. Open and press OK. a folder, eg Photos and press Options. Paste and press OK. Additional functions Alarm 1. 2. 3. 4. 5. 6. 7. Press Menu, scroll to and press OK. Select On and press OK. Enter the alarm time using the keypad, then press OK. For a single occurrence, select Single and press OK. For a repeated alarm, select Repeated and press OK.
English Jump to date Enter the date and press OK. View all Select a task and press Options for the following options: Edit Delete Delete all Edit selected task. Delete selected task. Delete all tasks. Note! The calendar will work even when the phone is switched off. Do not press Yes to power on if mobile phone use is prohibited or when it may cause interference or danger. 1. 2. 3. Daily reminder Enter time for the task, then press Enter subject. Press OK to save the task. .
English FM radio The FM radio has a frequency range from 87.5 to 108.0 MHz and 9 preset channels. Turning the radio on 1. Connect the headset to the headset socket 2. Press Menu, scroll to and press OK. The radio is turned on. The tuned frequency is displayed. Select channel using or . Use the side keys +/- to adjust the volume. Press to return to standby mode. The radio will continue to play. 3. . Save frequency 1. 2. 3. 4. 5. 6. Press Menu, scroll to and press OK. Select channel using or .
English Play Delete Edit Play the selected channel. Delete the channel. Press Yes to confirm or No to return to the channel list. Edit the channel name, then press to edit the frequency, use # to enter the decimal point. Press Save. Selecting channels Press keys 1-9 to quick-select a preset channel while the radio is playing. Manual input (changing search mode) 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Options. Select Manual input and press OK.
English Best grades Help Shows your best results. Press Back to return or Reset to reset the scores. Shows instructions for the game. Press Back to return. Settings Sound effect Use side buttons +/- to select On or Off, then press OK. Volume Use the side buttons +/– to adjust the sound volume, then press OK. Instructions for the REMOTE USER Sending remote control commands by text message. Activation must be set to On and the remote user must be entered in Number list on the Doro PhoneEasy 611.
English *#phonebook#Jeff Jackson#0700393939#0462805011#046280 5083# The number will be saved in the 611 Phonebook as: Jeff Jackson 0700393939 0462805011 0462805083 Note! Only use numerals for parameters 2, 3 and 4. If you use letters in these parameters it will be stored as empty/blank in the Phonebook. Contacts already saved in the Phonebook, will not be replaced. They will be duplicated. This is to avoid unintentional removal of contacts from the Phonebook.
English alert c confirm with “0” 0/1 0=Off 1=On alert s signal type 0/1/2 0=High 1=Low 2=Silent Example: You want to activate the assistance function. *#alert#a#1# You want Jeff Jackson to be stored in Number list in position one (1) with phone number: 0700-393939. *#alert#n#1#Jeff Jackson#0700393939# You want the SMS message to be sent out when the assistance button is pressed. Example of content in text message: This is an assistance message. Please take appropriate actions.
English Setting the one touch memories Command P1 P2 P3 memorykey a A key Name max length = 20 number max length = 40 memorykey b B key Name max length = 20 number max length = 40 memorykey c C key Name max length = 20 number max length = 40 Example: You want to set Jeff Jackson’s mobile number in memory key A in Doro PhoneEasy 611. ® Martha Thomson in memory key B and Steve Lewis in memory key C.
English Troubleshooting Phone cannot be switched on Battery charge low Battery incorrectly installed Connect the power adapter and charge the battery for 3 hours. Full battery capacity is reached after the battery has been charged 3–4 times. Check the installation of the battery. Failure to charge the battery Battery or charger Check the battery and charger. damaged Battery should only be Improve the charging environment. charged in temperatures between 0 °C and 40 °C Check the charger connections.
English SIM card error SIM card damaged Check the condition of the SIM card. If it is damaged, contact your service provider. Check the installation of the SIM card. Remove the card and reinstall it. Wipe the contact surfaces of the SIM card with a clean cloth. SIM card incorrectly installed SIM card dirty or damp Failure to connect to network SIM card invalid No coverage of GSM service Contact your service provider. Contact your service provider.
English Network services and costs Your device is approved for use on the networks. To use the device, you need a subscription with a service provider. Using network services may result in traffic costs. Some product features require support from the network, and you may need to subscribe to them. Operating environment Follow the rules and laws that apply wherever you are, and always turn off the unit whenever its use is prohibited or can cause interference or hazards.
English Areas with explosion risk Always turn off the unit when you are in an area where there is a risk of explosion. Follow all signs and instructions. There is a risk of explosion in places that include areas where you are normally requested to turn off your car engine. In these areas, sparks can cause explosion or fire which can lead to personal injury or even death. Turn off the unit at filling stations, and any other place that has fuel pumps and auto repair facilities.
English WARNING Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds while driving may distract your attention and cause an accident. Listen to a headset at a moderate level, and do not hold the device near your ear when the loudspeaker is in use.
English Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. • • • • • • • Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. Do not use or keep the unit in dusty, dirty environments.
English Weight: 103 g (including battery) Battery: 3.7 V / 800 mAh Li-ion battery Bluetooth® is a registered trademark of Bluetooth SIG, inc. eZiType™ is a trademark of Zi Corporation. vCard is a trademark of the Internet Mail Consortium. Hearing aid This device should work with most hearing aid equipment in the market. However, full compatibility with all equipment can not be promised.
PhoneEasy 611 (3031) LAST PAGE English Version 1.1 © 2012 Doro AB. All rights reserved. www.doro.
