Doro PhoneEasy 515 ® English
English 1. Volume control 2. Torch 3. Left selection button 4. Call button 5. Speed dial 6. Voice mail 7. Key lock 8. Microphone 9. Silent / Input method 10. Camera shortcut 11. Message shortcut 12. End call/Power on/off 22 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23.
English Contents Installation ................................................................................ 1 Installing the SIM card, memory card and the battery ............. 1 Charging .................................................................................... 2 Symbols .................................................................................... 3 Assistive functions ............................................................... 3 Display status symbols .............................
English Camera, options...................................................................20 Camera adjustments.............................................................20 Image viewer..............................................................................21 Image viewer, options...........................................................21 Connecting the phone to a computer ............................................22 Drag and drop content between phone and a computer ...........
English Hearing aid .........................................................................61 Specific Absorption Rate (SAR) .............................................61 Declaration of Conformity .....................................................
English Installation IMPORTANT! Turn off the phone and disconnect the charger before removing the battery cover. Installing the SIM card, memory card and the battery GB GB The SIM and memory card holder’s are located inside the battery compartment. 1 1. 2. 3. 4. 2 3 4 Remove the battery cover and the battery if it is already installed. Insert the SIM card by gently sliding it into the holder.
English Charging CAUTION Only use batteries, charger and accessories that have been approved for use with this particular model. Connecting other accessories may be dangerous and may invalidate the phone's type approval and guarantee. When the battery is running low, is displayed and a warning signal is heard. To charge the battery, connect the mains adapter to a wall socket and to the charging socket y. is displayed briefly when the charger is connected to the phone, when it is disconnected.
English Symbols Assistive functions The following symbols indicate information in the manual about assistive functions for: Seeing Handling Hearing Safety Display status symbols Signal strength No network coverage Ring only 5 Unread message in Inbox Ring + vibration Alarm active Vibration only Battery level Silent Call forward activated Bluetooth on, visible to others Bluetooth on, invisible to others Roaming (in other network) Missed call Headset connected Bluetooth connected Voice mail
English Display main symbols Mute Charger connect Message sending success Charger removed Message sending failed Headset in Error Headset out Warning Speaker on Query Speaker off Done (confirmed) Incoming call New message Outgoing call Battery level low Call ended Searching Missed call. Press Read to see the missed calls.
English Operation Activating the phone on the phone to turn it on/off. Press and hold the red button Confirm with OK to power off. If the SIM card is valid but protected with a PIN code (Personal Identification Number), PIN is displayed. Enter the PIN code and press OK ( upper left corner of keypad). Delete with Clear ( upper right corner of keypad). Note! If PIN and PUK codes were not provided with your SIM card, please contact your service provider. Attempts: # shows the number of PIN attempts left.
English Tip: You can always press to return to standby. Changing the language, time and date The default language is determined by the SIM card. See General, p.23 on how to change language, time and date. Making a call 1. 2. 3. Enter the phone number including the area code. Delete with Clear. to dial. Press Abort to cancel dialling. Press to end the call. Press Tip: For international calls, always use + before the country code for best operation. Press * twice for the international prefix +.
English Entering text Press a numerical key repeatedly until the desired character is shown. Wait a few seconds before entering the next character. Press * for a list of special characters. Select the desired character with / and press OK to enter it. Use the side keys +/– or / to move the cursor within the text. Press # to cycle upper case, lower case and numerals. Press and hold # to change input language.
English Call options During a call the selection buttons1 ( functions: ) give access to additional Options (left selection button) A menu with the following options is displayed: Hold single call/Retrieve single End single call New call Phonebook Messages Mute Hold/retrieve the current call. End the current call (same as ). Call another number (Conference). Search the phonebook. Write or read SMS messages. Disable the microphone.
English Tip: Call waiting must be activated, see Call setup, p.33. Call information During a call, the outgoing or incoming phone number and the elapsed call time is displayed. If the identity of the caller is withheld, Unknown is displayed. Speed dial You can use keys A and B and you can also use the numerical keys 0 and 2–9. To speed dial an entry from standby, press and hold the corresponding key. See Speed dial , p.31.
English CAUTION Using a headset at high volume may damage your hearing. Adjust the volume level carefully when using a headset. SOS calls As long as the phone is switched on, it is always possible to place an SOS call by entering the main local emergency number for your present location followed by . Some networks accept calls to emergency numbers without a valid SIM card. Contact your service provider for more information.
English The Emergency function may be configured so that the receiver of the call must press "0" (zero) to confirm, in order to stop the alarm sequence. If there is a risk that the emergency call will be answered by a voice mail/answering service, please activate the function Confirm with "0". See Confirm with "0", p.40. • Note! Some private security companies can accept automatic calls from their clients. Always contact the security company before using their phone number.
English Phonebook The phonebook can store 300 entries with 3 phone numbers in each entry. Creating a phonebook entry 1. 2. and press OK. Press Menu, scroll to Select -New contact- and press Add. 3. Name for the contact, see Entering text , p. 7 . Enter a Delete with Clear. / to select Mobile, Home or Office, and enter Use the phone number(s) including the area code. 4. 5. Picture and press Edit to associate a picture to the Select contact.
English 2. 3. Select a contact and press Options. Select one of the following options and press OK. View Show details for the selected contact. Edit 1. 2. / to move the cursor. Delete with Clear. Use Press Save. Add See Creating a phonebook entry, p.12. Call Press OK to call the contact. Send SMS Press OK to write a SMS message, see Creating and sending SMS, p.15. Send MMS Press OK to write a MMS message, see Creating and sending MMS, p.16.
English Select From phone and press Select to copy all phonebook entries from the phone memory to the SIM card. Press Yes to confirm or No to abort. Send vCard Select Send by SMS and press OK to send the selected phonebook entry as a vCard via SMS. Enter the phone number of the recipient. Alternatively use the arrow keys / to scroll through the phonebook, or quick search by pressing the key corresponding to the first letter of the entry, see Entering text , p. 7 . Press OK to send.
English Insurance: Contact 1: Contact 2: Doctor: Condition: Allergies: Blood type: Vaccination: Medication: Other info: Your insurance provider and policy number. Press Options and then OK to Add or Delete a contact from the phonebook, or Save to accept the current entry. If possible, add your relationship to your ICE contacts in the phonebook, such as “ICE Wife Mary Smith”. Any medical conditions/medical devices (e.g. diabetic, pacemaker). Any known allergies (e.g. penicillin, bee stings).
English Note! If you choose to add multiple recipients, you will be charged for each recipient (maximum 10). For international calls, always use + before the country code for best operation. Press * twice for the international prefix +. Creating and sending voice message A voice message use the same technology as a MMS. Both you and the recipient must have subscriptions that support MMS. The settings for MMS is supplied by your service provider and can be sent to you automatically via SMS.
English 2. 3. 4. 5. Select MMS and press OK. Type your message, see Entering text , p. 7 , then press Options. Add items to your message from the options Add subject, Add picture, Add sound and Add video. Add recipients with To and Send when ready. Add subject 1. 2. Select Add subject and press OK. Type your subject, then press Done. Add picture 1. 2. 3. 4. 5. Select Add picture and press OK.
English Add recipients (To) Select To and press OK to select recipient from Phonebook and press Add. Alternatively, select Enter number and press Select to add recipient manually and press Done. Select Add to add more recipient or select Send to send and then press OK. You can also modify the recipients by selecting one and press Options to Edit, Delete or Delete all. 1. 2. 3. Inbox, Sent, Outbox / SMS/MMS unread / SMS/MMS sent / SMS/MMS read / SMS/MMS unsent 1. 2. 3. 4.
English Edit Edit the message, then press Send. Forward Forward a message. Edit the message (if desired), then press Send. Use number Displays all phone numbers contained in the message as well as the sender's number. Call Save Send SMS Send MMS Call the selected number. Save the number in the Phonebook. Write a new SMS message. Write a new MMS message. Save objects (MMS only) To save text and media objects such as pictures, sound recordings and video.
English 3. Press settings: View Delete Delete all Save to dial the number or press Options for the following Show details for the selected call. Delete the call. Delete all calls in the Call log. Save the number in the Phonebook. Camera (take photos) To get sharp photos, wipe the lens clean with a dry cloth. 1. 2. 3. Press shortcut or press Menu, scroll to and press OK. Press to take photo. Press Options or Back (if you do not make any selection the picture is saved).
English • Use the side buttons +/– to adjust EV/Light sensitivity. Note! Zoom may reduce image quality. For more camera settings, see Camera, p.38. Image viewer View your saved images. 1. 2. 3. Press Menu, scroll to and press OK. Select an image, then press Options. Select one of the following options and press OK. Image viewer, options View Single view. Press Back when done. Send Select an option, then press OK: Send by MMS Send by Bluetooth Send image as MMS.
English Rename Rename image. Delete with Clear and press Done to confirm. Browse style You can change image view. Default is Large, you can also select List or Medium. In List the file name, the date and the size of the image is shown. Sort by Select if you want to sort your images by Name or Time. Storage Select where the phone should save files if you have memory card installed. Delete all Press OK to delete all images. Press Yes to confirm or No to return.
English Drag and drop content between phone and a computer 1. 2. 3. Connect your phone to a computer using a USB cable. Wait until the phone/memory card appears as external disks in the file explorer. Drag and drop selected files between the phone and the computer. Note! When the phone/memory card is mounted to the computer, the phone cannot access the memory card. Some functionality and applications in the phone, such as the camera, may not be accessible.
English 6. 7. Select Set date and press OK. Enter the date (DD/MM/YYYY), then press OK. Setting the time/date format and press OK. 1. Press Menu, scroll to 2. Select General and press OK. 3. Select Time & date and press OK. 4. Select Set format and press OK. 5. Select Time format and press OK. 6. Select 12 hours or 24 hours and press OK. 7. Select Date format and press OK. 8. Select the desired date format and press OK. Setting Auto time on/off and press OK. 1. Press Menu, scroll to 2.
English Press Yes to change Language, Time & date, Ring tone, Volume, Text size or Themes. Press No if you don’t want to change. Owner number The phone numbers assigned to your SIM card are saved in Owner number if this is allowed by the card. To view/edit or the numbers: 1. 2. 3. and press OK. Press Menu, scroll to Select General and press OK. Select Owner number and press OK. See Phonebook, p.12 on how to add names/numbers.
English Select network To view available network, press Select network. A list of available network operators is displayed (after a short delay). Select desired operator and press OK. Network mode To select another network, select Network mode and then select one of the following options. Automatic Manual Network is selected automatically. Network is selected manually. Use Select network to select desired operator. Services This menu may contain pre-programmed services from your network provider.
English 3. 4. Select Phonebook storage and press OK. Select one of the following options and press OK. SIM Phone 1 phone number per contact. Number and length of the phone numbers/contacts that can be stored will vary depending on SIM card/service provider preferences. 300 contacts with 3 phone numbers each Mobile, Home or Office. Phonebook picture You can change the phonebook view mode. Select On to see the contacts associate picture (Picture), or select Off to display only the names of contacts. 1.
English Tone setup 1. 2. 3. 4. 5. 6. Press Menu, scroll to and press OK. Select Sound and press OK. Select Tone setup and press OK. Select Ring tone and press OK. / to select one of the available melodies, the melody Scroll will be played. Press OK to confirm or Back to discard changes. Set up the Alarm, Message tone, , , Keypad tone, Power on and Power off in the same way. Ringtone volume 1. 2. 3. 4. Press Menu, scroll to and press OK. Select Sound and press OK. Select Volume and press OK.
English Vib. then ring Silent Starts with vibration and adds ring tone after a short while. No sound or vibration, the display light is lit. Extra tone Warning and error tones are used to alert you of low battery power, phone and SIM card errors, etc. 1. 2. 3. 4. 5. 6. Press Menu, scroll to and press OK. Select Sound and press OK. Select Extra tone and press OK. Select Warning and press On/Off to enable/disable. Select Error and press On/Off to enable/disable. Press Done to save.
English 2. 3. 4. Select Display and press OK. Select Idle display and press OK. Select Clock only, Clock & Operator or All info and press OK. Themes You can select different themes to personalise the phone's texts and background. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Display and press OK. Select Themes and press OK. / to select a theme. Scroll Press OK to confirm or Back to discard changes. LCD backlight Select the delay time for the display backlight. 1. 2. 3. 4.
English 2. 3. 4. 5. 6. Select Calls and press OK. Select Voice mail and press OK. Select Empty and press Add. Select Phonebook to add a contact from the Phonebook. Alternatively, press Manual. See Phonebook, p.12 on how to add names/numbers. Press OK. To edit or delete an existing entry, select it and press Options, then select Edit or Delete and press OK. Call 1. 2. 3. 4. 5. voice mail and press OK. Press Menu, scroll to Select Calls and press OK. Select Voice mail and press OK.
English You can edit the contact information for the dedicated speed dial buttons A and B. 1. 2. Press corresponding button. Use / to highlight the name or the number, then press Edit. Press OK to confirm. Delete with Clear. Top 10 Set the entry as one of the first 10 contacts listed in the phonebook. 1. 2. 3. 4. 5. 6. Press Menu, scroll to and press OK. Select Calls and press OK. Select Top 10 and press OK. Select one of the empty entries and press Add.
English Any key Select Any key and press OK, select On and press OK to be able to answer incoming calls by pressing any button (exemption ). Call setup Depending on network support and subscription. Contact your service provider for more information. Caller ID Display or hide your phone number on the recipient's phone when you call. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call setup and press OK. Select Caller ID and press OK.
English Call divert You can divert calls to an answering service, or to another phone number. Set up which calls should be diverted. Select a condition and press OK, then select Activate, Deactivate or Query status (see Call waiting, p.33) for each. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Calls and press OK. Select Call setup and press OK. Select Call divert and press OK. Select one of the following options and press OK. Voice calls Diverts all voice calls.
English Incoming calls All calls When roaming Cancel all Press OK then select: User can dial out but not receive incoming calls. User can not receive incoming calls while roaming (operating in other networks). Cancel all call barring (password needed). Messages 1. 2. 3. and press OK. Press Menu, scroll to Select Messages and press OK. Select one of the following options and press OK. Predictive text Select On and press OK to enable Predictive text/eZiType , see Entering text , p. 7 .
English 1. 2. Press Edit and enter the service centre number. Press Clear to delete. Press Save to save the new number. Cell information You can receive messages on various topics from your service provider, such as weather or traffic conditions in a particular region. For available channels and relevant channel settings, contact your service provider. Cell broadcast messages cannot be received when the device is roaming.
English 2. Select Add and press OK for the following settings: Enter the settings for your service provider. The correct settings can be obtained from the service provider. Account name APN User name Password Homepage Connection type Proxy address Proxy port User name Password 3. 4. 5. Add account name. Add APN (Access Point Name). Add user name. Add password. Add homepage. Use the side buttons +/- to select connection type HTTP or WAP. Add proxy address. Add proxy port. Add proxy user name.
English Vibration The SMS vibration alert is several short vibrations that continues for either Short (4 seconds) or Long (12 seconds). Note! If Alert type is set to Ring only the phone will not vibrate. Delivery report You can select if you want the phone to notify you when your SMS has reached the receiver. Select Delivery report and press OK. Select On or Off to enable/disable. Press OK to save. Note! If you choose Delivery report=On, some operators will charge you for that message.
English Image size Select one of the following options Wallpaper (lowest quality), 1 MP or 2 MP (highest quality). Note! With higher quality (more megapixels), less pictures can be stored in memory. Shutter sound Select one of the following options Off, Low or High. Emergency Settings for the Emergency button function. 1. 2. Press Menu, scroll to and press OK. Select Emergency and press OK for the following settings: Activation Select one of the following options and press OK.
English SMS The message to be sent to the contacts in numbers list when the Emergency button is pressed. Activation Select one of the following options and press OK. On Off The phone sends a text message before dialling. The phone dials without sending a message first. Message Press Edit and enter the message and then press OK to confirm. Note! You must write a message if you activate the SMS function. Confirm with "0" Select one of the following options and press OK.
English Alarm info Please read this important safety information before enabling the emergency function: Be careful about including numbers with automatic answering in the call list, as the alarm sequence stops once the call is answered. Note! This information is not applicable if Confirm with "0" is set to On. Bluetooth® IMPORTANT! When you are not using Bluetooth connectivity, select Function on/off / Off or Visibility / Off. Do not pair with an unknown device.
English 2. When connecting to another Bluetooth device you need a shared password. Enter the password and press OK. My device Lists saved devices and enables you to add new devices. Select device from the list and press Options. Connect/Disconnect Set default Rename Delete Delete all Connect/disconnect selected device. Select required profile, usually a headset. Select the connected device as default. Change the name of the device. Delete the device from the list. Delete all devices from the list.
English Note! You need to input the current PIN code to disable/enable SIM lock. Phone lock Select On/Off and press OK to enable/disable. Note! You need to input the current Phone code to disable/enable Phone lock. The default Phone code is 1234. Keypad lock Select one of the following options and press OK. Auto keylock Select the time delay for automatic keypad locking. Press OK to confirm.
English 3. 4. 5. Select Phonebook to add a contact from the Phonebook. Alternatively, press Manual. . Press Enter the number and press OK. Repeat until you have 5 contacts (maximum). To edit or delete an existing entry, select it and press Options, then select View, Edit or Delete and press OK. Fixed dial (FDN) You can limit calls to certain numbers saved on the SIM card. The list of allowed numbers is protected by your PIN2-code. Mode Fixed numbers Select On/Off and press OK. Enter PIN2.
English Reset all If you select Reset all, your phone's settings and content, such as contacts, number lists and messages, will be deleted in phone memory (SIM memory is not affected). Input the phone password and press OK to reset. Note! The default Phone code is 1234. File manager Manage the contents and properties of files. You can open, delete, move, copy and rename files. Supported image format: BMP/GIF/JPG/PNG. Photos taken with the built in camera are saved as JPG.
English Send by MMS Send by Bluetooth Send by MMS. Press OK to create a message, see Creating and sending MMS, p.16. Send to other Bluetooth devices, see Bluetooth®, p.41. Details View detailed information about the file, e.g. date, size, copyright-protection. Use Select an option from the list, then press OK. Wallpaper Phonebook picture Save as display background. Press OK. Send to a phonebook contact. Press OK. Rename Rename the file. Delete with Clear and press Done to confirm.
English Additional functions Alarm 1. 2. 3. 4. 5. 6. 7. and press OK. Press Menu, scroll to Select On and press OK. Enter the alarm time using the keypad, then press OK. For a single occurrence, select Single and press OK. For a repeated alarm, select Repeated and press OK. Scroll through the list of weekdays and press On/Off to enable/disable the alarm for each weekday, then press Done. To edit an alarm, press Edit, then press OK. To stop the alarm, press Off. The alarm is now deleted.
English View all Select a task and press Options for the following options: Edit Delete Delete all Edit the selected task Delete the selected task Delete all tasks Note! The calendar will work even when the phone is switched off. Do not press Yes to power on if wireless phone use is prohibited or when it may cause interference or danger. Calculator The calculator can perform basic mathematical operations. 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Enter the first number.
English 2. 3. 4. 5. 6. Select channel using or . When a station has been found, select Options. Select Save frequency and press OK. Enter a name for the new channel, see Entering text Press Save. , p. 7 . Switch off 1. 2. Press Menu, scroll to and press OK. Press Options, then press Switch off. Tip: Disconnecting the headset will also turn off the radio. Channel list (editing the channel list) 1. 2. 3. 4. 5. Press Menu, scroll to and press OK. Select Options. Select Channel list and press OK.
English Fine tune Auto search Manual tuning with or . Automatic station search with or . Auto save Note! This will overwrite all previously saved channels! 1. 2. 3. Press Menu, scroll to and press OK. Select Options. Select Auto save and press OK to automatically install available radio stations in channels 1-9. Torch Use of the built in torch. 1. 2. Press Menu, scroll to and press OK to switch on the torch. Press Off to switch off the torch. Note! The torch will drain the battery very quickly.
English Setting a contact in the phonebook Command P1 P2 P3 P4 phonebook name max. length=20 mobile max. length=40 home office Example: You want to send Jeff Jackson’s mobile number, home number and his office number to Doro PhoneEasy 515. The mobile number is: 0700-393939. Home number: 046-280 50 11. Office number: 046-280 50 83.
English Setting the emergency function P3 P4 1–5 location in Number list Name max. length=20 number max. length=40 m message 0/1 0=Off 1=On Text max. length=70 alert c confirm with “0” 0/1 0=Off 1=On alert s signal type 0/1/2 0=High 1=Low 2=Silent Command P1 P2 alert a activation 0/1/2 0=Off 1=On Normal 2=On (3) alert n number alert Example: You want to activate the emergency function.
English You want to set the Signal type to low. *#alert#s#1# Tip: Remember to write down the positions you send. This way it is easier for you to later send changes. Setting the one touch memories Command P1 P2 P3 memorykey a A key Name max length = 20 number max length = 40 memorykey b B key Name max length = 20 number max length = 40 memorykey c C key Name max length = 20 number max length = 40 Example: You want to set Jeff Jackson’s mobile number in memory key A in Doro PhoneEasy 515.
English You want to send a new calendar task to Doro PhoneEasy 515. It is for a dentist appointment in December 1, 2010 at 10:30.
English Troubleshooting Phone cannot be switched on Battery charge low Battery incorrectly installed Connect the power adapter and charge the battery for 3 hours. Check the installation of the battery. Failure to charge the battery Battery or charger Check the battery and charger. damaged Battery should only be Improve the charging environment. charged in temperatures between 0 °C and 40 °C Charger incorrectly Check the charger connections.
English SIM card error SIM card damaged Check the condition of the SIM card. If it is damaged, contact your service provider. Check the installation of the SIM card. Remove the card and reinstall it. Wipe the contact surfaces of the SIM card with a clean cloth. SIM card incorrectly installed SIM card dirty or damp Failure to connect to network SIM card invalid No coverage of GSM service Contact your service provider. Contact your service provider.
English Network services and costs Your device is approved for use on the GSM 900/1800/1900 MHz networks. To use the device, you need a subscription with a service provider. Using network services may result in traffic costs. Some product features require support from the network, and you may need to subscribe to them. Operating environment Follow the rules and laws that apply wherever you are, and always turn off the unit whenever its use is prohibited or can cause interference or hazards.
English Areas with explosion risk Always turn off the unit when you are in an area where there is a risk of explosion. Follow all signs and instructions. There is a risk of explosion in places that include areas where you are normally requested to turn off your car engine. In these areas, sparks can cause explosion or fire which can lead to personal injury or even death. Turn off the unit at filling stations, and any other place that has fuel pumps and auto repair facilities.
English WARNING Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds while driving may distract your attention and cause an accident. Listen to a headset at a moderate level, and do not hold the device near your ear when the loudspeaker is in use.
English Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. • • • • • • • Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. Do not use or keep the unit in dusty, dirty environments.
English Weight: 82 g (including battery) Battery: 3.7 V / 800 mAh Li-ion battery Bluetooth is a registered trademark of Bluetooth SIG, inc. ® eZiType is a trademark of Zi Corporation. ™ vCard is a trademark of the Internet Mail Consortium. Hearing aid This device should work with most hearing aid equipment in the market. However, full compatibility with all equipment can not be promised.
PhoneEasy 515 (2011,2025) LAST PAGE English Version 1.2 © 2012 Doro AB. All rights reserved. www.doro.
