������ �� �������� ����� Manual doro 5055/5065R Downloaded from: http://www.guardianalarms.
Picture shows 5065R.
Index Installation 4 Operation 9 Unpacking ..............................4 Connection.............................4 Batteries ................................6 Battery Charge Indicator........6 Range ....................................7 The Display ............................8 Making a Call .........................9 Receiving a Call .....................9 Redial Button .........................9 Volume Control ......................9 Optional Network Services ....10 Handset Paging ..................
English Installation Unpacking The package should include the following items: - Handset - Mains adapter - Base unit - Line cord - 2 batteries - User Manual – Guarantee card (AU & NZ only) Models 5055+1/5065R+1 are also supplied with an extra handset including batteries, charger and electrical mains adapter. Connection 1. Connect the mains adapter to the Y socket of the base unit and to an electrical wall socket. 2. Remove the battery cover from the back of the handset.
Installation English Only for models with an extra handset (5065R+1/5055+1): 8. Connect the mains adapter to the Y socket of the charger pod and to an electrical wall socket. 9. Remove the battery cover from the back of the handset. Insert the batteries into the handset ensuring correct battery polarity is observed. Replace the battery cover. 10.
English Installation Batteries The telephone is supplied with environmentally friendly nickel metal hydride (NiMH) batteries, 2 x AAA 1.2V. As with all batteries performance may degrade over time, should you notice that the standby time has reduced considerably or there are signs of leakage, both batteries should be replaced. Fully charged batteries will last for approx 190 hours in standby or approx 12 hours call time.
Installation English Range The range of the telephone varies depending on different factors in the surrounding enviroment. The radio waves transmitting the call may be hindered by obstructions, reducing the range. Specified ranges require unobstructed transmission between the handset and the base unit. In such ideal conditions, the telephone range can be up to 300 metres. In a densely populated area, house, apartment, etc. the range of the telephone will be reduced.
English Installation The Display Indicator % Function Handset Ringer p Programme. = Menu. Battery charge indicator. Numbers in Caller ID log (CID). b Phonebook 1. Indicates that a call is connected. Flashes when it rings. i Intercom call. Phonebook 2. Shown within range of the base unit. Flashes when out of range. 5065R only: a Upper row: Answering machine settings. Lower row: The indicator is lit when the answering machine is activated. New incoming messages (ICM) on the answering machine.
Operation English Important! Please note when programming all references to press = to press once and then immediately release the button. Making a Call 1. Enter the required telephone number. Mistakes can be erased using x. 2. Press O , the telephone number will now be dialled. 3. Press O again to terminate the call. Receiving a Call 1. Wait for the handset to ring. 2. Press O to answer the call. 3. Press O again to terminate the call.
English Operation Optional Network Services Access to additional network services (e.g. Call Waiting) can be gained by using the recall button R , * and # keys. Contact your network operator for more information. Press the recall button R followed by the extension number to transfer calls when connected to a PBX (TBR only). Handset Paging Pressing J on the base unit will activate the paging signal of the handset. This function is used to help locate the handset or to page the person carrying the handset.
Operation English Hands Free Function The hands free button s is located on the back of the handset (5055), and on the front of the handset (5065R). This allows calls to be made without having to hold the handset. If you wish, you can switch between handset and hands free during a call. 1. Enter the required telephone number. 2. Press O . When the call has been connected press s. The hands free feature will be activated and the conversation can be heard through the speaker. 3.
English Phone Book Using the Phone Book There are two Phone Books which will store a total of 20 (10+10) telephone numbers (25 digits maximum) and names (10 characters maximum), this allows a stored phone number to be dialled using fewer button presses than if dialled manually. The Phone Books are arranged alphabetically. If you subscribe to a Caller ID service, the telephone number (and for those numbers stored in the Phone book) the name of a caller will be shown upon receiving an incoming call.
Phone Book English Dialling from the Phone book 1. Select a Phone book by pressing the corresponding button b or 2. Scroll through the entries using 8 8 /9 9. 3. Press O , the displayed telephone number will now be dialled. . Changing Numbers 1. Select the phonebook into which you wish to change the entry by pressing the corresponding button: b or . 2. Scroll to the desired memory by pressing 8 8 /9 9. Press 0. 3. Press x to delete, use the number buttons to enter the new numbers. 4.
English Caller Identification Explanation of Caller ID Caller ID allows you to see who is calling before you answer a call, and see who has called in your absence. If a name is attached to the telephone number and stored in the phone book, the name will be shown while the phone is ringing. The call log will store up to 10 telephone numbers, which can easily be retrieved for viewing and dialling. If you are checking incoming calls on the call log, only the telephone number will be shown.
Caller Identification English Messages Besides showing telephone numbers, the display may also show a message. No information was received, e.g. when receiving an ****** international call, voicemail (Optional Network Services required), secret or blocked numbers. Removing a Number 1. Press . 2. Scroll to the required telephone number by using 8 8 /9 9. 3. Press C (6 ). Transferring Numbers to the Phone Book 1. Press . 2. Scroll to the required telephone number by using 8 8 /9 9. 3.
English Settings Description of the menu system The telephone has a menu system, controlled by the following buttons: w ( R) Activates and deactivates the menu system. 0 Move one step forward and/or confirm selected option. x Used to erase/correct. 8 8 (1 ) 9 9 (3 ) 16 Scroll through the menu alternatives. www.doro.
Settings English The Handset ringer There are three different ringer tunes. - One for regular incoming calls, - One for incoming calls from numbers stored in Phone book 1 b , - One for incoming calls from numbers stored in Phone book 2 . The display also shows the attached symbol during ringing and only applies if you subscribe to Caller ID services. There is NO ringer in the base unit. 1. Press w ( R ). 2. Scroll using 8 8 /9 9 until % flashes in the display. Press 0. 3.
English Settings Register a New Handset or Base Unit To enable the use of more than one handset a registration has to be performed. Every new handset must be registered in order to use a base unit. A maximum number of 2 base units can be registered with each handset, and each base unit can handle up to 4 handsets. Additional base units and handsets can be purchased from your local retailer. Please also refer to page 23 for more information on Expanded Systems. 1.
Settings English De-register All other Handsets All other handsets except the one on which you perform the operation below, can easily be de-registered from a base. 1. Press w ( R ). 2. Press the keypad digits 9 5. 3. Enter the PIN code (1111 for this model). 4. Press 0. Type of Caller ID (CID) Dependant on your network sytem requirements the Caller ID settings may need to be adjusted. If the telephone has been purchased in Australia this setting will be displayed as 1/4. 1. Press w ( R ). 2.
English Settings Tone/Pulse Dialling (UK only) Select dialling type (tone or pulse). The default setting is tone dialling, dependant on your network system requirements this may not require changing. This setting only applies to models purchased in the UK. 1. Press w ( R ). 2. Scroll using 8 8 /9 9 until w flashes in the display. Press 0. 3. Press 0 repeatedly until the display shows 2/5. 4. Scroll using 8 8 /9 9 to the desired setting (TONE/PULSE).
Settings English Recall Button Timing In some PBX installations, the timing of the Recall button may need to be adjusted. For normal domestic use, this setting should not require changing. If the telephone has been purchased in Australia this setting will be displayed as 3/4. 1. Press w ( R ). 2. Scroll using 8 8 /9 9 until w flashes in the display. Press 0. 3. Press 0 repeatedly until the display shows 4/5. - UK (3/4 - Australia). 4.
English Settings Handset Volume Control (5065R only) 1. Press w ( R ). 2. Scroll using 8 8 /9 9 until flashes in the display. Press 0. 3. Scroll using 8 8 /9 9 to the desired setting (+=low, ++=medium, +++=high, and ++++=maximum). Press 0 to confirm. 4. Press w ( R ) to exit the Menu system. 22 www.doro.
Expanded System English General Information DECT (Digital Enhanced Cordless Telephone) technology offers superior performance, clarity and security using its completely digital method of transmission. You can: - Use (register) up to 4 handsets with the same base unit. - Use (register) up to 2 base units with the same handset. - Make internal calls (intercom) and transfer calls between handsets using the same base unit. Additional base units and handsets can be purchased from your local retailer.
English Expanded System Base Units Placement If you wish to use several handsets with one base unit, you should make sure that the base unit is placed “in the middle”, to evenly divide the base unit range among the handsets. If you wish to use several base units to achieve an extended coverage within a specific area, eg a large home or office, a storage area, etc, then it is important that the range of the base stations overlap.
Expanded System English Intercom Function When using several handsets with the same base unit, calls can be made internally between the handsets, this is referred to as an internal call. Internal calls can only be made between handsets operating on the same base unit. 1. On the handset press I . 2. All other handsets will now ring. 3. Answer the call by pressing O on one of the other handsets. If an external call is received while an intercom call is in progress, a tone will be heard.
English The Answering Machine (5065R) About the Answering Machine The answering machine has to be turned on in order to receive messages. On incoming calls the telephone will be answered after the selected number of rings (please refer to page 23). When the answering machine answers an incoming call, the caller will hear your outgoing message (OGM) followed by a short beep, at which point they can leave an incoming message (ICM) of up to 2 minutes in length.
English The Answering Machine (5065R) Outgoing Message (OGM) The OGM is your announcement to the caller and may be up to 2 minute in length. If you choose not to record your own OGM, the caller will hear a prerecorded OGM. Use your OGM to advise the caller to begin talking after a beep is heard. For example: “Hello, we are unable to take your call right now, please leave a message after the beep, and we’ll return your call as soon as possible. Thank you for calling.” Recording your OGM 1.
English The Answering Machine (5065R) Using the Answering Machine When new ICM’s are recorded will flash in the display and also the a button on the back of the handset. Playback will always be new ICM’s only, the answering machine will then return to standby mode. Press 2 to playback all messages, starting with the oldest ICM. 1. Ensure the a symbol is visible within the display, and the a button located on the back of the handset is illuminated. 2.
English The Answering Machine (5065R) Personal Message - MEMO MEMO – is a personal message recorded directly onto the answering machine without dialling. This means that the machine may be used as an electronic notebook, where messages, reminders or other notes to family members or colleagues can be recorded. Each MEMO can be recorded for up to 2 minutes. 1. Ensure the a symbol is visible within the display, and the a button located on the back of the handset is illuminated. 2.
English The Answering Machine (5065R) Number of Rings The number of rings before the answering machine answers can be selected between 2, 3, 4, 5 or TOLL SAVER. 1. Press w ( R ). 2. Scroll using 8 8 /9 9 until a flashes in the display. Press 0. 3. Press 0 repeatedly until the display shows 3/5. 4. Scroll using 8 8 /9 9 to the required setting (2, 3, 4, 5 or TOLL). Press 0 to confirm setting and move to the next programming sequence, alternatively. 5. Press w ( R ) to exit the Menu system.
English The Answering Machine (5065R) Recording Quality / Time There are two choices of recording quality/time. A - high quality recordings (total time 5 minutes maximum). B - standard quality recordings (total time 7 minutes maximum). 1. Press w ( R ). 2. Scroll using 8 8 /9 9 until a flashes in the display. Press 0. 3. Press 0 repeatedly until the display 5/5. 4. Scroll using 8 8 /9 9 to the required setting (A/B). Press 0 to confirm. 5. Press w ( R ) to exit the Menu system.
English The Answering Machine (5065R) Out of Memory The answering machines maximum recording capacity will be either 5 or 7 minutes (depending on the selected sound quality). This time is shared between the OGM, MEMO and ICM messages. If the memory is full, no new ICM messages will be accepted until the existing messages have been played and erased.
The Answering Machine (5065R) English Remote Control This machine can be remotely accessed using an ordinary tone dialling telephone. Dial the telephone number to which the answering machine is connected, after the OGM has been played enter your Four digit remote code. Once the code is accepted several remote options are available. 1. Dial the telephone number to which the answering machine is connected. 2. Press * after the OGM is played. 3. Enter your four digit remote code (1111 when supplied). 4.
English Other Troubleshooting Check that the telephone cord is undamaged and properly plugged in. Disconnect any additional equipment that may be connected. If the problem is resolved, the fault is with the other equipment. Test the equipment on a known working line. If the product works then the fault is with the line. Please inform your local telephone company.
Other English The Answering Machine Is Not Answering - Check that the unit is switched on - Check that the telephone cable and the mains adapter are correctly connected. - Check that the answering machine is not full. The Answering Machine Does Not Respond to Remote Control - Check that the telephone you are using to remotely control the answering machine is a tone dialling telephone.
English Other UK If you cannot resolve the fault using the faultfinder section, technical support is available on the Premium Rate Number: 0906 302 0114. Calls cost 50 pence per minute (prices correct at the time of going to press), and is operational between 9AM - 5PM Monday-Friday excluding Bank Holidays. Alternatively, E-mail on: tech@doro-uk.com You can contact us in writing: Consumer Support Group, Doro UK Ltd.
� �� � ������� Other English ��� �� ���� Australia and New Zealand Products permitted for connection to the telephone network are marked �� ���������� with in Australia and in New Zealand. These marks indicate the products comply with the regulations and can be used without concern in the country of purchase.
English Other AUSTRALIA NEW ZEALAND Consumer Support Ph: (02) 8853 8444 Fax: (02) 8853-8489 Email: support@doro.com.au Web site: www.doro.com.au Consumer Support Ph: 0900 500-25 (Toll Call) Fax: (09) 574-2722 Email: support@atlasgentech.co.
English Version 1.
