Technical data
40
English
Instructions for the REMOTE USER
Sending Remote Control Commands by Text Message
Activation must be set to On Normal and the remote user must be entered in
Numbers list in Doro PhoneEasy 332gsm.
All contacts sent to Doro 332 by remote conguration are stored in the Phone, even
if the default storage is set to SIM storage. 3 phone numbers for each contact
Mobile, Home number or Ofce number.
Note!
SMS format must be *#Command#, otherwise the SMS cannot be identied
as a remote control command.
Parameters are the content you want to send and you must use # sign to
separate two parameters. In tables P = Parameters.
Setting a contact in the Phonebook
Command P 1 P 2 P 3 P 4
phonebook
name
max length = 30
mobile
max length = 40
home ofce
Example 1:
You want to send Mr Jackson’s mobile phone number, home number and his ofce
number to Doro 332. The mobile phone number is: 0700-393939. The home
number is: 046-280 50 11. The ofce number is: 046-280 50 83.
*#phonebook#Jackson#0700393939#0462805011#0462805083#
The number will be saved in the Doro 332 Phonebook as:
Jackson
0700393939
0462805011
0462805083
Note!
Enter the phone number including the area code.
When storing international numbers, always use the international prex + before
the country code for best operation.
Only use numerals for parameters 2, 3 and 4. If you use letters in these
parameters it will be stored as empty/blank in the Phonebook.
Contacts already saved in the Phonebook, will not be replaced.
They will be duplicated.
This is to avoid unintentional removal of contacts from the Phonebook.