Technical data

29
English
SMS
The message to be sent when the Emergency key is pressed.
Choose if you want the phone to send a message the numbers in
Number list before dialling them, or simply call without sending
the message rst.
If you choose to set the phone to send a message, we recommend
that you write the message and save it as a standardized message
to be sent should you need help.
Select SMS and press OK.
Select Activation and press OK.
Select On / Off and press OK.
Press to Message and press OK.
Press Edit and enter the message and then press OK to
conrm.
Alarm info
Please read this important safety information before enabling thesafety information before enabling theinformation before enabling thethe
Emergency function:function:
Be careful about including numbers with automatic answering in
the call list, as the alarm sequence stops once the call is answered.
Conrm with ”0”
Select one of the following options and press OK.
Off
The phone will dial the rst number on the list. If the call is not
answered within 25 seconds, the next number is dialled. Dialling
is repeated 3 times or until the call is answered, or until is
pressed.
On
The function will work as above AND:
If the receiver doesn’t press
0
within 60 seconds the call will be
disconnected and the next number in sequence will be called.
If the receiver presses
0
within 60 seconds, the call is conrmed
and no further call attempts will be made (emergency sequence
interrupted).
1.
2.
3.
4.
5.