Specifications

15
English
Multihandset
GeneralinformationaboutMultihandset(+1...)
Whenyoubuyyourtelephonethehandsethasalready
beenregisteredtotheaccompanyingbaseunitatthe
factory.Ifyouwillbeusingseveralhandsetswithone
baseunit,makesurethatthebaseunitisplacedcentrally
sotherangeissimilarforallthehandsets.
Youcanregisterupto3handsetstoonebaseunit.
ThismodelisalsoGAP(GenericAccessProle)
compatiblewhichmeansthatboththehandsetandbase
unitcanbeusedwithmostotherGAPcompatibleunits
fromothermanufacturers.However,theGAP-protocol
doesnotguaranteethatallfunctionswillwork.
Internalcalls
Whenseveralhandsetsareusingthesamebaseunit
internalcallscanbemadebetweenthehandsets.
1. Pressdown untilINTisshown.
2. Thedisplaywillshowavailablehandsetnumbers.
3. Presstheappropriatekey
1
-
3
forthehandsetyou
wishtocall.
Transferringcallsbetweenhandsets
1. Anexternalcallisconnected.
2. Connectaninternalcallasdescribedabove.
3. Press
L
totransferthecall.