Operation Manual
English
4
Volume control
The volume can be adjusted during a call with
}
/
{
.
On hold
A call in progress can be put on hold by pressing
O
, press once again to return to
call. If a call is put on hold is shown in the display. If the opposite party puts the
call on hold is shown.
Mute button
The microphone can be muted during a call with
C
. Press
C
again to activate the
microphone. Use
C
to delete wrong numbers entered in a phone number.
Change ring signal
Press
in standby mode to change ring signal.
Troubleshooting
Check that the telephone cord is undamaged and the USB is properly plugged in.
The following icons can be shown in the message eld in the lower right of the
screen .
The phone is connected correctly.
The phone is not connected or connected incorrectly.
Skype has not been started or Skype with Doro225 is not allowed to use Skype.
If there is no sound in the phone, see that Skype is set correctly. Click on Tools
Settings Audio units and select USB Audio Device (Doro 225IPC) for Sound in,
Sound out and Ring signal.
You can learn more about Skype at www.skype.com/help/guides/.
Declaration of conformity
Doro hereby declares that the Doro 225IPC conforms to the essential requirements and
other relevant regulations contained in the Directives 1999/5/EC and 2002/95/EC.
A copy of the manufacturer’s declaration is available from www.doro.com/dofc
Guarantee
This product is guaranteed for a period of 12 months from the date of purchase. In
the unlikely event of a fault occurring, please contact the place of purchase. Proof of
purchase is required for any service or support required during the guarantee period.
This guarantee shall not apply to a fault caused by an accident or a similar incident
or damage, liquid ingress, negligence, abnormal usage or any other circumstances
on the user’s part. Furthermore, this guarantee shall not apply to a fault caused by
a thunderstorm or any other voltage uctuations. As a matter of precaution, we
recommend disconnecting the telephone during a thunderstorm.