Dormont WHOLESALE Catalog Gas Appliance Connectors & Plumbing Supplies Connect with Confidence® Dormont.
! WARNING This literature is not intended to replace the available installation instructions or the experience of a trained product installer. Please refer to the installation manual for further information and product warnings.
RANGE TABLE CONNECTORS OF CONTENTS Range Connectors ............................................................................................................6-7 Furnace Connectors .........................................................................................................8-9 Dryer Connectors..........................................................................................................10-11 Water Heater Connectors....................................................................
A COMPLETE LINE OF GAS CONNECTORS FOR ALL TYPES OF GAS APPLIANCES Stainless Steel Gas Connectors Durable, naturally corrosion-resistant 304 stainless steel gas connectors for indoor or outdoor stationary appliance applications. Coated Stainless Steel Gas Connectors SafetyShield® coating provides easy gas line identification and extra protection from chemical corrosion from accidental contact with household chemicals. Consistent coverage provides protection along the entire length of the connector.
DURABLE, CORROSION–RESISTANT STAINLESS STEEL TUBING Exclusive No-Neck® design increases tubing flexibility. Design certified Safety and quality Quality flared end adapters For indoor and outdoor use. Consistent quality ensures a safe product you can trust. create a metal to metal seal to ensure integrity in critical applications. Features Benefits 304 stainless steel........................................................................ Durable, corrosion-resistant construction No Neck® design....
PART NUMBERING SYSTEM Gas Connectors 3 0 C 31 32 48 le ng n "i 48 n: tio O D ip 5 8" 5/ sc r De 4 th 3 IP 2 1/ 2" F 1 C (1 Sa orru /2 "I ye fet ga D) llo yS ted w hi co eld Tub at in ed g 1/ 2" M IP (T ap pe d 3/ 8" FI P) EXAMPLE: Characters: Character 2: Coating Part # O Corrugated Tubing OA Low-visibility Black OC SafetyShield Yellow Coating 1 Hot-Dipped Gray PVC Coating 1P 15 PSIG Connector with HotDipped, Gray PVC Coating Character 1: Diameter of connector (choose one) Part # 1 3/8" O
PART NUMBERING SYSTEM Fittings and Gas Shutoff Valves 90 30 31 ed 3/8 "F 1/2 "M IP 15 /16 "16 t Fla re ( 5/8 "O D (ta pp tin Fit n: tio ip De sc r 3 IP) 2 hre ad ) 1 g EXAMPLE: Characters: Character 1: Style of accessory (fitting or valve) Part # 90 Fitting 91 Connector Valve 92 Straight Valve 93 Angle Connector Valve 94 Full Port Valve 95 Elbow Characters 2 & 3: Choice of fitting or valve for both ends of connector (choose two) Part # 10 3/8" OD Flare 20 1/2" OD Flare 21 3/8" MIP (Tapped 1/4"
RANGE CONNECTORS Made in USA Supr-Safe® Stainless Steel Standard Fittings 30 Series 5/8" OD (1/2" ID) * For additional configuration including nut x nut connectors see Gas Appliance Connectors and Plumbing Supplies Pricing Book or visit the Dormont website www.Dormont.
RANGE CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel Standard Fittings 30C Series 5/8" OD (1/2" ID) Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 Model Number 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6-TS 5/8" OD x 1/2" MIP EFV-TS 31V4-TS 1/2" OD x 1/2" MIP EFV-TS 31V2-TS 3/8" OD x 1/2" MIP EFV-TS
FURNACE CONNECTORS Made in USA Supr-Safe® Stainless Steel Standard Gas Fittings 30 Series 5/8" OD (1/2" ID) * For additional configuration including nut x nut connectors see Gas Appliance Connectors and Plumbing Supplies Pricing Book or visit the Dormont website www.Dormont.
FURNACE CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel Standard Gas Fittings 30C Series 5/8" OD (1/2" ID) Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 Model Number 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6-TS 5/8" OD x 1/2" MIP EFV-TS 31V4-TS 1/2" OD x 1/2" MIP EFV-TS 31V2-TS 3/8" OD x 1/2" MIP
DRYER CONNECTORS Made in USA Supr-Safe® Stainless Steel Standard Gas Fittings 20 Series 1/2" OD (3/8" ID) * For additional configuration including nut x nut connectors see Gas Appliance Connectors and Plumbing Supplies Pricing Book or visit the Dormont website www.Dormont.
DRYER CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel Standard Gas Fittings 20C Series 1/2" OD (3/8" ID) Model Number Category K Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6-TS 5/8" OD x 1/2" MIP EFV-TS 31V4-TS 1/2" OD x 1/2" MIP EFV-TS 31V2-TS 3/8" OD x
WATER HEATER CONNECTORS Made in USA FIP end Supr-Safe® Stainless Steel Standard Gas Fittings 20 Series 1/2" OD (3/8" ID) Model Number 20-2121-12 20-3131-12 20-2131-12 20-2222-12 20-2232-12 20-3132-12 20-3135-12 20-2121-18 20-3131-18 20-2222-18 20-2131-18 20-2232-18 20-3132-18 20-3135-18 20-2121-24 20-3131-24 20-2131-24 20-2222-24 20-2232-24 20-3132-24 20-3135-24 20-2121-30 20-3131-30 20-2131-30 20-2222-30 20-2232-30 20-3132-30 20-3135-30 Ordering Code 0240272 0240290 0240275 0240256 0242336 024012
WATER HEATER CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel Standard Gas Fittings 20C Series 1/2" OD (3/8" ID) Model Number Category L Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6-TS 5/8" OD x 1/2" MIP EFV-TS 31V4-TS 1/2" OD x 1/2" MIP EFV-TS 31V2-TS 3/8
SPACE HEATER CONNECTORS Made in USA Supr-Safe® Stainless Steel Standard Gas Fittings 10 Series 3/8" OD (1/4" ID) * For additional configuration including nut x nut connectors see Gas Appliance Connectors and Plumbing Supplies Pricing Book or visit the Dormont website www.Dormont.
SPACE HEATER CONNECTORS SafetyShield® Yellow Coated Stainless Steel Standard Gas Fittings Model Number 10C Series 3/8" OD (1/2" ID) Category K Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6-TS 5/8" OD x 1/2" MIP EFV-TS 31V4-TS 1/2" OD x 1/2" MIP EFV-TS 31V2-TS 3/8" OD x 1/2" MIP
GAS LOG CONNECTORS Made in USA MIP end LV Black Coated Standard Gas Fittings 10A Series 1/2" OD (3/8" ID) 10ANW Series 3/8" OD (1/2" ID) Model Number 10A-2121-12 10A-2131-12 10A-3131-12 10A-3132-12 10A-2135-12 10A-2121-18 10A-2131-18 10A-3131-18 10A-3132-18 10A-2135-18 10A-2121-24 10A-2131-24 10A-3131-24 10A-3132-24 10A-2135-24 10A-2121-30 10A-2131-30 10A-3131-30 10A-3132-30 10A-2121-36 10A-2131-36 10A-3131-36 10A-3132-36 10A-2135-36 Ordering Code 0240373 0240386 0240407 0240377 0240634 0240412 0240430
GAS LOG CONNECTORS Made in USA MIP end LV Black Coated Standard Gas Fittings Model Number 20A Series 30C 3/8" OD (1/2" ID) 5/8" 20ANW Series 1/2" OD (3/8" ID) Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6-TS 5/8" OD x 1/2" MIP EFV-TS 31V4-TS 1/2" OD x 1/2" MIP EFV-TS 31V2
WALL HEATER CONNECTORS Made in USA 10C Series 3/8" OD (1/2" ID) SafetyShield® Yellow Coated Stainless Steel Standard Gas Fittings Model Number 10C-3132-12 10C-3132-18 10C-3132-24 10C-3132-30 10C-3132-36 10C-3132-48 10C-3132-60 10C-3132-72 Ordering Code 0240348 0240381 0240419 0240461 0240507 0240115 0240700 0240743 FIP end Description 1/2" MIP x 1/2" FIP x 12"L Coated 1/2" MIP x 1/2" FIP x 18"L Coated 1/2" MIP x 1/2" FIP x 24"L Coated 1/2" MIP x 1/2" FIP x 30"L Coated 1/2" MIP x 1/2" FIP x 36"L Coated
WALL HEATER CONNECTORS Made in USA LV Black Coated Standard Gas Fittings Model Number 10A Series 3/8" OD (1/4" ID) Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6-TS 5/8" OD x 1/2" MIP EFV-TS 31V4-TS 1/2" OD x 1/2" MIP EFV-TS 31V2-TS 3/8" OD x 1/2" MIP EFV-TS 31V1-TS 3/8" OD x
HIGH BTU CONNECTORS Made in USA MIP end FIP end Ultra Flow High BTU Gas Connectors ® Model Number 40/41/40C Series 1" OD (3/4" ID) 50/51 Series 1-1/4" OD (1" ID) 60/61 Series 1-1/2" OD (1-1/4" ID) 41-4142-12 41-4142-18 41-4142-24 41-4142-30 41-4142-36 41-4142-48 41-4142-60 41-4142-72 51-5152-12 51-5152-18 51-5152-24 51-5152-30 51-5152-36 51-5152-48 51-5152-60 51-5152-72 61-6162-12 61-6162-18 61-6162-24 61-6162-30 61-6162-36 61-6162-48 61-6162-60 61-6162-72 Ordering Code 0240923 0240937 0240186 024018
HIGH BTU CONNECTORS Made in USA SafetyShield® Yellow Coated High Btu Stainless Steel Model Number 40C-4142-12 40C-4142-18 40C-4142-24 40C-4142-30 40C-4142-36 40C-4142-48 40C-4142-60 Ordering Code 0240884 0240908 0240927 0240939 0240950 0240969 0240986 MIP end Description 3/4" MIP x 3/4" FIP x 12"L 3/4" MIP x 3/4" FIP x 18"L 3/4" MIP x 3/4" FIP x 24"L 3/4" MIP x 3/4" FIP x 30"L 3/4" MIP x 3/4" FIP x 36"L 3/4" MIP x 3/4" FIP x 48"L 3/4" MIP x 3/4" FIP x 60"L FIP end Pack Quantity 1 1 1 1 1 1 1 Coated Co
LP GAS CONNECTOR Made in USA 31P Series 5/8" OD (1/2" ID) Applications Advantages • From 1st stage regulator on LP tank to riser • From riser to 2nd stage regulator at the home • From LP tank to home • Safe and easy alternative to typical copper or polyethylene connectors • Increase productivity with quick installation because fittings are already attached • No cutting or flaring of copper needed which saves time and material • 304 stainless steel tubing significantly reduces the chance of the mate
MANUFACTURED HOME GAS CONNECTOR KITS 30C Series 30 and 31 Series 5/8" OD (1/2" ID) 40 and 41 Series 1-1/4" OD (1" ID) 50 Series 1-1/2" OD (1-1/4" ID) Standard Gas Connector Kits Model Number 7010-3132 Ordering Code 0241071 7020-4142 0241023 7030-4142 0241058 Description (1) #30-3132-24" Gas Connector (1/2" MIP x 1/2" FIP) 1/2" quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag (1) #30-4142-24" Gas Connector (3/4" MIP x 3/4" FIP) 3/4" quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warni
MOVEABLE FOODSERVICE CONNECTORS AND ACCESSORIES 1650 Series 5/8" OD (1/2" ID) 1675 Series 1" OD (3/4" ID) 16100 Series 1-1/4" OD (1" ID) High BTU commercial gas cooking equipment requires specifically designed gas connection systems to ensure that they are supplied with the correct amount of gas to function properly. Dormont makes the following components designed to be used together for a maximum CODE-COMPLIANT food service equipment installation.
GAS ADAPTERS AND SHUTOFF VALVES GAS ADAPTERS AND SHUTOFF VALVES Made in USA Gas Adapters Model Number Easy to Use Handle • Handles are ergonomically designed for smooth turns. • Quarter-turn handle design makes for easy on/off operation. • Most handles feature a lockout for added safety. Easier Installation • Large wrench flats allow for quick, easy installation.
GAS APPLIANCE AND LINE PRESSURE REGULATORS Dormont gas appliance and line pressure regulators are designed for main burner and/or pilot applications, where precise control of tiny flows is an essential operating requirement. • Housings are high strength aluminum castings. • All models have been tested for multi-position mounting and may be installed in any plane or angle without restriction. • They may be used with natural, manufactured, mixed, LP, or LP gas-air mixture.
Supr-Safe® STAINLESS STEEL GAS CONNECTOR SPECIFICATIONS Supr-Safe® Stainless Steel Gas Connector Specifications Applications FIP end MIP end Features and Specifications • Tubing................ Annealed, 304 stainless steel (ASTM A240) • Flare nuts........... Brass or plated steel • Adapters............. Brass or plated steel Meets SAE J512 standard – 45° flare (with the exception of 15/16" – 16 threads of 5/8" OD) • Optional coating..
SafetyShield® YELLOW COATED GAS CONNECTOR SPECIFICATIONS SafetyShield® Yellow Coated Gas Connector Specifications FIP end MIP end Features and Specifications Design Certifications and Approvals • Tubing................ Annealed, 304 stainless steel (ASTM A240) • Coating............... Custom Formulated Polymer • Flare nuts........... Brass or plated steel • Adapters.............
LV BLACK COATED GAS CONNECTOR SPECIFICATIONS LV BLACK COATED GAS CONNECTOR SPECIFICATIONS LV Black Coated Gas Connector Specifications MIP end Specifically engineered for high-temperature applications such as gas logs, fireplace inserts, and free-standing fireplaces FIP end • Designed to reduce glare and hide the connector from view to enhance the beauty of the hearth. • Hi-temperature black coating hides the connector while withstanding up to 350°F.
Ultra Flow® HIGH BTU GAS CONNECTOR SPECIFICATIONS MIP end High BTU Stainless Steel Gas Connectors FIP end Features and Specifications • Tubing Annealed, 304 stainless steel (ASTM A240) • Flare nuts Brass or plated steel • Adapters Brass or plated steel • Optional coating Heavy-duty, antimicrobial, hot-dipped gray PVC (41, 51 & 61 series). Coating will not hold a flame.
PORTABLE OUTDOOR GAS CONNECTOR SPECIFICATIONS Portable Outdoor Gas Connector Features 3/8" Model: 3 /8" ID Hose with 3/8" Female Flare x 3/8" Female NPT Quick Disconnect 1/2" Model: 1 /2" ID Hose with 1/2" Female Flare x 1/2" Female NPT Quick Disconnect Available in 10' and 12' lengths Gas Hose Connector listed to ANSI Z21.54/CSA 8.4 Quick Disconnect listed to ANSI Z21.41/CSA 6.9 Pressure and Temperature Working Pressure: 1/2 psi / .
CERTIFICATIONS This is a representative list of certifications carried by Dormont Manufacturing. Not all products carry all certifications. Product certifications are listed on the applicable product page. Contact Dormont Manufacturing at 1-800-DORMONT for additional information. USA United Kingdom (UK) Canada Canadian Standards Association British Standard Institute ANSI Z21.24 /CSA6.10 Connectors for Gas Appliances ANSI Z21.69 /CSA 6.
DORMONT SHOWROOM AND RANGE POP ACCESSORIES CONNECTORS Vinyl Pegboard Display Quick and easy to assemble, the Dormont vinyl POP display simply attaches onto existing pegboard or slatwall. The base is 24" x 55" and has a variety of accessories to create a custom display! Call Customer Service for an order form. Free Standing Display The D-D-RESPOP features an attractive but tough powder-coat finish. Product can be displayed on standard peg hooks or with special ganghooks, (see below).
Connect with Confidence® With Dormont, you—and your customers— gain the security of knowing… With Dormont, you—and your customers— gain the quality assurance of… VERY connector is backed by THE safe E installation of more than 115 million gas connectors over 50 years. ■ EVERY connector is 100% leak tested. ■O ur products are specified and preferred by gas utilities, housing authorities, professional installers, and restaurant chains nationwide.
NOTES (800) 367-6668 ■ Dormont.
NOTES 36 (800) 367-6668 ■ Dormont.
Watts Family of Brands Watts designs, manufactures, and sells an extensive line of flow control, water safety, water filtration & treatment, drainage, and PEX plumbing products. The Watts family of companies provides a single source for solutions used to safely convey, conserve, and manage water. Making Watts your single source for plumbing-related solutions will streamline your operations, save you money, and reduce the variety of repair parts needed for maintenance.