Installation Manual

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
741-887
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
3
©2013 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 4: Carefully pry the top two sockets
o the top of the switch. Then undo the
remaining harness clip. Set the switch aside.
STEP 5: Remove the Phillips head screw
from the bottom of the armrest assembly
and pry away the piece that surrounds the
window switch.
STEP 6: With the plastic surround removed,
un-clip the bulb harness plug. Set plastic
trim aside.