Other Content

ManualsBrandsDorman ManualsAutomotiveDorman 741-870 Front Driver Side Replacement Power Window Regulator with Motor for Select Ford/Mercury Models

Disclaimer:

Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto

technician before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in

property damage or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National

Highway Tra c Safety Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.

ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have

a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special

attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.

No reproductions in whole or in part without prior written approval.

741-870

STEP 6: Using a pick or  at-blade

screwdriver, disconnect the window

motor connector from the

window lift motor.

STEP 7: Using either painter’s tape, a wedge, or a saddle cup assembly, attach to the

window glass to keep the glass stationary. Failure to do so could result in glass breakage.

STEP 8: Using a ¼” drill bit and a

3/8” drill, drill out the center of the

rivets attaching the window

regulator to the door. In some cases

you can use a punch to drive the

center of the rivet out so that you

can have more surface area for the

drill bit to stay centered on.

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR