Other Content

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
741-823
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
4
©2013 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 4: Using your non-marring pry tool,
remove the window switch assembly
starting at the bottom.
STEP 5: With the switch assembly removed,
you can access the harness clip. A pick
or small  at-blade screwdriver may be
needed to undo the locking tab.
STEP 6: Using your non-marring pry tool,
carefully work it around the outside of the
door panel to pop the clips from the inner
door skin.