Other Content

5
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
741-769
INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
©2011 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 7: Using either painter’s tape,
saddle cup assembly or a window glass
wedge, disconnect the window glass
from the window regulator assembly.
STEP 8: Loosen the bolts attaching
the regulator to the inner door panel.
STEP 9: Lift the regulator upward
to release it from the keyed hole slots
and remove the regulator through the
access hole in the door inner panel.