Other Content

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
741-527
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
5
©2012 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 10: Temporarily connect the power window master switch and lower the window
glass to expose the two (2) window glass mounting bolts.
STEP 10a: Remove the two (2) window glass mounting bolts and manually slide the
window glass into the up position. Hold the window glass in place with either saddle cup
assembly, painter’s tape, or wedge.
STEP 10b: Disconnect the window lift motor connector.
STEP 13: Once the window regulator attaching hardware has been removed, remove the
window regulator assembly through the access hole.
STEP 11: Remove the bottom two (2)
regulator attaching bolts.
STEP 12: Remove the upper regulator
attaching bolt.