Installation Manual

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
741-428
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
9
©2013 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 7: Connect the interior door handle cable to the interior door handle.
STEP 8: Align the interior door trim panel attaching points to the door. Once the
attaching points are aligned, push and slide the interior door trim panel in a downward
motion. NOTE: Be sure to slide the door lock rod through the opening in the interior door
trim panel. Failure to do so will cause the door lock rod to become trapped inside of the
interior door trim panel.
STEP 9: Pull the power switch wiring harness
through the interior door trim panel and
attach to the power switch assembly.
STEP 10: Attach the power switch assembly
onto the interior door trim panel.