Other Content

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
741-126
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
10
©2012 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 9: Install the interior door trim panel.
To install the panel, align the corresponding
holes with the mating connector that is
mounted on the interior door trim panel.
Align the top of the interior door trim panel
with the retainer that is mounted on the top
part of the door and slide in a downward
motion to push the door panel into place.
Fit the interior door trim panel
onto the lip of the door
STEP 10: Attach the master power switch
assembly as well as the power mirror switch.
NOTE: Not all vehicles were equipped with
power mirrors.