Installation Manual

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
740-872
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a qualied auto technician
before attempting to perform any work you are not qualied to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Trac Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain specic service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a qualied technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
5
STEP8:Using an 8mm wrench, remove the
door handle attaching bolt.
STEP9:Remove the door handle assembly
through the door trim panel opening.
STEP10:Remove the upper interior door
trim retaining screw. The screw is located
just above the interior door mechanism.
The screw is somewhat obscure. Failure
to remove this screw will not allow you to
remove the door trim panel.