Other Content

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
740-710
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
5
©2013 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 10: Disconnect the power switch assembly.
STEP 10a: Using a 10mm socket and ratchet assembly, remove the two (2) screws
attaching the window regulator to the door glass.
STEP 11: Once the door glass has been separated from the window regulator, manually
slide the door glass into the closed position and hold in place with either a saddle cup
assembly, painter’s tape, or a wedge.
STEP 12: Disconnect the window lift
motor connector.
STEP 13: Using a 10 mm socket and ratchet
assembly, remove the three (3) window lift
motor retaining screws.