Other Content

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
740-178
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
14
©2012 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
STEP 18: Once the interior door trim panel is in position, tighten down the interior door
trim panel retaining screws.
STEP 17: Once the interior door handle
bezel has been attached, adjust the interior
door trim panel so that there is an even gap
between the interior door handle and the
interior door handle bezel.
STEP 19: Install the interior door trim panel
retaining screw cover.
STEP 20: Verify that the window regulator is operating properly and that the door glass
is sliding smoothly.
We appreciate your opinions regarding this product!
Please call our Technical Assistant with any challenges or suggestions
regarding the installation or operation of this product.
1-800-523-2492