User's Manual
Table Of Contents
- Table of contents
- 1 About this Document
- 2 Grouped safety messages
- 3 Product Description
- 4 Design and function
- 5 Installation
- 5.1 Installation conditions
- 5.2 Installation diagram
- 5.3 Installation lines
- 5.4 Wall mounting
- 5.5 Cable routing
- 5.6 Setting the PoE switches
- 5.7 Connections
- 5.8 Vandal contact
- 5.9 Fastening the cover
- 6 Commissioning
- 7 Packaging/Return
- 8 Disposal
- Index
Design and function Technical Manual
16 04045524 - 08/2016 Kaba access manager 92 32
4 Design and function
4.1 Opening the housing
NOTICE
Danger for electronic components due to electrostatic discharge.
Improper handling can damage or destroy electrostatically sensitive components on
printed circuit boards (PCB).
• General ESD protective measures must be observed and applied.
Remove the housing cover in the following way:
1. Remove two screws M3x8 (TORX 8) on the device bottom side.
2. Swivel the bottom side of the cover and disengage it at the top.