Operation Manual



带格式的: 边框:底端: (无框线)



4. Open the command line (click start – run, input cmd and click OK button), click adb
version to check whether the version of adb is 1.0.26. If not, please check whether the
relatively previous version adb route is included in the environment variables, delete the route
if it exists. Input adb devices, if device is identified and displayed, it means adb is well
configured.
5. After the adb is well configured, the device can be operated through commands. Input
“adb shell” and press “enter” button to enter shell environment of the device. In this Linux
Shell, you are able to execute various kinds of Linux commands.





‐7‐