Installation Instructions

6 Time recording made easy – The Kaba terminal 96 00
Installation made easy
STRAIGHTFORWARD INSTALLATION USING THE WALL FASTENING PANEL
Quick installation
The Kaba terminal 96 00 comes with a
wall fastening panel and also assign-
able connectors for optional use of in-
and output for doorcontrol.
In order to keep power supply costs
down, the terminal is Power over
Ethernet compatible (PoE). This means
that the power can be supplied directly
via the network cable.
In the event that your infrastructure
does not support PoE, you can also op-
erate the Kaba terminal 96 00 from a
12 V DC power source. Simply plug in
the network cable and, if required, the
preassigned connectors, install the
terminal in the wall fastening panel, fix
with two screws and it’s done.
Quick starting thanks to the
«1-click-installation»
The terminal, which is delivered with
DHCP, after successful installation
connects with the network automati-
cally. Once the terminal has been
connected it will be recognized by
B-COMM. After that the terminal
parameters can be configured easily.