Manual

38
Alarm Relay Contact Rating
5A@ 120VAC(non-inductive load) Form C
Power 100-240VAC (±10%), 50-400Hz, switching power
supply
Accuracy Specification ± 1 digit
INPUT TYPE
1°° Resolution 0.1°°
Resolution
J,K,T,E thermocouples
1° plus 0.03% rdg 0.5°C or 0.9°F
R and S thermocouples
1° plus 0.03% rdg
1 DEG ONLY
PT100a .00385,
PT100a .00392 RTD
1° plus 0.03% rdg 0.5°C or 0.9°F
*Accuracy percentage of reading ±1 digit
RS232 Serial Communications (Standard)
Type: full-duplex voltage, isolated from ground to 500VAC.
Complete configuration set-up and message display
capability, programmable to transmit current display, set
1°/0.1°resolution, thermocouple type, F°/C° plus alarm status
and scanning channel indication in ASCI II code. 9600 bps 8
bits no parity 1 stop bit. Isolation: Isolated between input and
internal circuit to 500VAC
Analog Output (Option)
0-10VDC (load current 2ma maximum)
4-20mADC (load resistance 300Ω maximum)
Accuracy: ±0.25% full scale of display value
Resolution: Approximately .0125 Full scale