User`s manual

Other important connections: The RM450, the Player and the Recorder (V1) should be locked to the

same House Sync signal.

Our Recommendations:

1. RM450 on the V1side should be in CTL mode and the V1 should be in A-Time or A-Time As LTC.

2. Synchro = ON

3. RM450, Left side DIP Switches: All OFF

4. RM450, Right Side DIP Switches: All OFF except bit number 2 which sets the edit time to 4 frames.

5. V1, Emulation: BVW75

6. V1, Frame Mode = ON

7. V1, Edit IN = 5

8. V1, Edit OUT = 5

9. Lock all units including the RM450 to House Sync and set the V1 to Sync Source = Sync IN

10. V1, Mode = Remote