User`s manual

59
12.6 The Video has no colors
If the video is not stable and is not displaying colors properly, you have set the Sync From to Auto or
Sync In but you do not have a black burst signal (a composite signal is not accepted) fed to the SYNC
IN
connector. If the video stabilizes when you switch to Internal, the problem is definitely your Sync
From
setting.
12.7 No Audio from input monitor
If you cannot hear the audio when you go in input monitor, check the option menu setting for Source &
Audio Level. (Option Menu 32)
12.8 Unable to write to active drive
If you are not able to write to your active drive, i.e. cannot record, initialize or format, check Option
Menu (12) (Unit Type) and make sure you set it to Recorder & Player. You should also check Option
Menu 5 (SCSI Setup) and make sure it is set to Read/Write.
12.9 Forcing power ON in any condition
The V1 can be set to remain on even if AC power is cycled OFF then ON again. To force a “always ON”
operation please consult our tech support department.