User`s manual

♦ Use the REW or FF until you get to the destination project.

♦ We recommend defining a segment for each project and select the desired project from the (Clip

Menu 08).

5.3.3 Repeating Time Code

If your drive is divided for example into 3 different projects recorded using the same time code,

you can switch between projects using two different methods:

♦ Use the REW or FF until you get to the destination project. The only way you would recognize the

project is by looking at the video because the LCD display will give you the same time code for all

three project. Not recommended.

♦ We recommend defining a segment for each project and select the desired project from the (Clip

Menu 08).