User`s manual

4.3 Controller Menu

The front panel controls of the V1 are called the “RCV2 controller”. The RCV2 controller communicates

with the V1 via RS-422. The controller has several unique functions. To call up the Controller Menu

hold the ESCAPE button and press the menu up ! arrow key (or down key "). Use the arrow keys to

scroll through the menu selections. The TOGGLE button changes the parameters for the selected menu.

Press TOGGLE to increase the parameter and hold OPTION and TOGGLE to decrease the parameter.

To disable the RCV2 and prevent accidental operation, hold the OPTION button then press ESCAPE.

Press again to unlock the RCV2. When the RCV2 is in “disable mode” the letters “DIS” will be

displayed in the top right corner of the 4 line LCD.

The RCV2’s functions are described below:

(00) RCV2 Version Displays the firmware version number for the V1 motherboard..

(01) Video Use the TOGGLE button to switch the front panel LCD monitor

“on” or “off”. Default is “on”

(02) Composite Out For V1-UHD only. Switches the composite output on the rear

panel of the V1-UHD “on” or “off”. Default is “on”.

(03) Burn In Window When ON, the burn in window will be enabled on the confidence

LCD monitor (it needs to also be enabled in the Option Menu

setting).

Defualt is “on”.

(04) Delay Mode Dual-channel V1 configured for single drive operation or V1-

MP2 only.

This is used for broadcast delay to define the time delay between

the recorder and the player(s). Ensure that the V1 is not recording.

Select the player (channel 2) and enter the delay time desired and

press ENTER. The record and play channel will locate to 0 time

code, the recorder will start recording and the player will wait for

the time set for delay to elapse, and will then start playing back

automatically.

The transport controls on the player (channel 2) will be disabled

when the time delay function is engaged. To stop the delay

function select the recorder (channel 2) and press STOP.

Default is “off”.

(05) Preroll Used in conjunction with Slomo Mode (See below). When a time

value is entered the RCV2 identifies the pre-roll time from the

location point. This helps to compensate for the delay between the

action being recorded and the push of the save button.

(06) Slomo Mode Dual-channel V1 configured for single drive operation or V1-

MP2 only .

Used for sports slow motion replay applications. When ON, the

RCV2 operates like a slow motion controller.