User`s manual

29
(10) Time Left This menu selection will display how much time (HH:MM:SS:FF) is still available
on the disk from the end of the existing recording. The total duration is calculated
using the disk capacity detected, the compression rate, and the number of audio
channels. After an Initialize command, Time Left displays the full capacity of
the drive in "HH:MM:SS:FF" format. If you call this menu during recording, it will
show the time left at the moment it was activated. When the drive is fully recorded,
"Time Left" will display 00:00:00:00 and you are only allowed to record over
existing material. When this menu selection is active pressing the ++ key will
update the time left.