User`s manual

23
Note : Please do not use YUV/RGB output and Y/C (S-Video) outputs at
the same time because these signals are coming from the same buffered
outputs and so this will produce a mismatch on impedance loads.
Sync In House Sync input BNC connector for the V1 synchronization reference.
Use only Black Burst Sync here. Your Sync input should not exceed 1V
P-P.
Video Analog Composite video input and output BNC connectors. Video IN is
where you connect your video signal for recording to the V1 and Video
OUT is for connection to a video monitor or another video recorder.
S-Video Two separate Y and C BNCs. You must use a Y/C to Mini DIN-4
adaptor for single cable S-VHS applications.
SDI Optional. Serial Digital Interface input and output BNC connectors for a
direct connection with digital betacams.
RGB/YUV Optional. Three RGB or YUV selectable BNC output connectors
3.2 Video Inputs / Outputs >>Uncomp. HDTV
HDSDI Serial HDTV Video
Y Pb Pr Analog HDTV Video
SYNC Input Tri-level sync input. Locks the V1 to an external sync source
CVBS Composite Reference Output