User`s manual

DESIGN OF MANUAL

This user’s manual covers the V1 MPEG2, DCT and Uncompressed series. Although the basic operation

of all V1 products is the same, there are minor differences. When a feature refers to only one product

series that function will be highlighted in bold with the name of the product as seen in the example

below:

>>DCT ONLY – for the DCT product series, V1, V1m, V1d, V1x2

>>MPEG2 ONLY – for the MP2 product series. V1-MP2

>>UncompSD ONLY – for the Uncompressed standard definition video product series. V1-U

>>UncompHDTV ONLY – for the HDTV Uncompressed product series. V1-UHD

Bold text is used when referring to buttons on the front panel of the machine or when referring to the

display of the LCD screen.

Clip & Segment: Note that throughout the manual the terms clip and segment are used interchangeably.

This manual was written with the latest product firmware numbers below.

DCT (V1, V1m, V1d, V1x2) 4.16v

MPEG2 (V1-MP2): 4.16v

Uncompressed (V1-U): 4.16v

HDTV Uncompressed (V1-UHD): 4.16v

Front Panel (RCV2) firmware 1.12

The V1 firmware can be checked by going to the Option Menu (hold the option button then press the

menu button). Scroll to Version No by pressing the down arrow key when you reach Option Menu 00.

Check the front panel firmware in the Controller Menu. Hold the ESCAPE button and press MENU.

And then scroll to Firmware.

If you have a newer 4.16 firmware than shown above, check the addendum pages on the back of this

manual for a list of changes and additions. If you have recently upgraded your firmware please print out

the README document included in the zip file with the new firmware. You can also download the latest

V1 manual from our tech support page “manual” section on the Doremi website

If you have an older firmware than shown above, then please upgrade your V1 to the latest firmware by

downloading the new firmware from our tech support page’s “firmware” section on the Doremi website.

If you will not be upgrading then please download the manual with the same firmware version as your V1

from the Doremi ftp page.