INSTRUCTION MANUAL 5-PC WOOD & METAL DINING SET Model No: DA6794 UPC CODE: 0-65857-16888-4 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM CARTON) Date of purchase: _______ / _______ / _______ DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge.
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No. 413 12345 Albert-Hudon Boulevard, Suite 100 Montreal, Quebec Canada H1G 3L1 E-MAIL: das@dorel.
5-PC WOOD & METAL DINING SET DA6794 HARDWARE LIST 1 2 3 Ø1/4" X 1/2" Ø1/4" X 1-3/8" Ø3/16" X 5/8" BOLT BOLT WOOD SCREW 48 PCS 8 PCS 16 PCS 4 ALLEN KEY 1 PC
5-PC WOOD & METAL DINING SET DA6794 PARTS LIST A B C BACK FRAME RIGHT CHAIR LEG LEFT CHAIR LEG 4 PCS 4 PCS 4 PCS D E F CHAIR FRONT RAIL CHAIR MIDDLE RAIL SEAT CUSHION 4 PCS 4 PCS 4 PCS G H I TABLE TOP TABLE STRETCHER TABLE LEG 1 PC 1 PC 4 PCS
-PC WOOD & METAL DINING SET DA6794 STEP 1 Attach the right and left chair legs (B & C) to back frame (A) with bolts (1) and Allen key (4). Attach the chair middle rail (E) to chair legs (B & C) with bolts (1) and Allen key (4). NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.
5-PC WOOD & METAL DINING SET DA6794 STEP 2 Attach the chair front rail (D) to the chair legs (B & C) with bolts (2). Ensure that the chair front rail (D) goes smoothly into the two chair legs before tightening the bolts (2). Tighten all bolts previously installed.
5-PC WOOD & METAL DINING SET DA6794 STEP 3 Attach the seat cushion (F) to the chair frame with wood screws (3) as shown. Use a Phillips head screw driver (not included) to tighten the screws. NOTE- Seat cushion (F) does not have pre-drilled holes. Wood screws (3) will make their own holes in seat cushion (F). Repeat steps 1- 4 to assemble the other chairs.
5-PC WOOD & METAL DINING SET DA6794 STEP 4 Attach the metal legs (I) to the table top (G) with bolts (1). Leave bolt (1) loose. Attach the stretcher (H) to the table legs (I) with bolts (1). Use Allen key (4) to tighten all bolts installed in this step. Turn the table upright.
5-PC WOOD & METAL DINING SET DA6794 CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. Product Maximum Weight 100 lbs That's it ! You've finished assembling your dining set. DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge.
MODEL #: DA6794 Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Customer Service Fax Number 514-353-7819 Email: das@dorel.
