LOFT BED WITH DESK Model Number: DA6580 UPC Code: 0-65857-17353-6 Color: Espresso Congratulations on your latest furniture purchase! Dorel Living furniture has been developed with quality, convenience and style in mind. We trust it will provide you with many years of exceptional comfort and service. Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece by taking a few minutes to go through this booklet.
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part. Customer Service Department No. 413 12345 Albert-Hudon Boulevard, Suite 100 Montreal, Quebec Canada, H1G 3L1 E-MAIL: das@dorel.
NOTES * READ EACH STEP CAREFULLY BEFORE STARTING. IT IS VERY IMPORTANT THAT EACH STEP OF INSTRUCTION IS PERFORMED IN THE CORRECT ORDER. IF THESE STEPS ARE NOT FOLLOWED IN SEQUENCE, ASSEMBLY DIFFICULTIES WILL OCCUR AND CAN RESULT IN INJURY. * CAUTION: ADULT ASSEMBLY REQUIRED * MAKE SURE ALL PARTS ARE INCLUDED. WORK IN SPACIOUS AREA, PREFERABLY ON A SMOOTH SOFT SURFACE. * ASSEMBLY WILL REQUIRE TWO PEOPLE. * MOST BOARD PARTS ARE LABELED OR STAMPED ON THE RAW EDGE.
LOFT BED WITH DESK DA6580 HARDWARE LIST 1 2 Φ 1/4" x 100mm Φ 6.5mm x 48mm JOINT CONNECTOR (4mm HEX HEAD) 12 PCS WOOD JOINT CONNECTOR (4mm HEX HEAD) 12 PCS 3 4 Φ 6.5mm x 100mm Φ 4mm x 35mm WOOD JOINT CONNECTOR (4mm HEX HEAD) 26 PCS FLAT HEAD SCREW 26 PCS 5 6 Φ 11.
LOFT BED WITH DESK DA6580 HARDWARE LIST 9 10 Φ 1/4" x 64mm Φ 8mm x 30mm JOINT CONNECTOR (4mm HEX HEAD) 7 PCS WOOD DOWEL 2 PCS 11 12 Φ 1/4" x 32mm Φ 9mm x 17mm JOINT CONNECTOR (4mm HEX HEAD) 4 PCS HEX CAP 2 PCS 13 14 Φ 1/4" x 15mm 30mm x 30mm x 18mm JOINT CONNECTOR (4mm HEX HEAD) 12 PCS L SHAPED METAL PLATE 6 PCS 15 16 Φ 3.
LOFT BED WITH DESK DA6580 PARTS LIST A B LEFT FRONT POST 1 PC C LEFT BACK POST 1 PC D RIGHT BACK POST 1 PC E RIGHT FRONT POST 1PC E F HEADBOARD CROSS 6 PCS HEADBOARD CENTER CROSS 1 PC E H M R J N L I E R J H F S H E T K T A G C U V W X back view B
LOFT BED WITH DESK DA6580 PARTS LIST G H HEADBOARD CENTER CROSS 1 PC J I HEADBOARD PANEL 4 PCS K BACK SIDE RAIL 1 PC M L DESK FRONT RAIL 1PC N LONG GUARDRAIL 1 PC P SLAT 13 PCS O SHORT GUARDRAIL 1 PC Q RIGHT LADDER END 1 PC FRONT SIDE RAIL 1 PC LEFT LADDER END 1 PC R LADDER STEP 5 PCS GUARDRAIL LEG 2 PCS
LOFT BED WITH DESK DA6580 PARTS LIST S T SHORT GUARDRAIL POST 1 PC V U DESK PANEL 1 PC W BOTTOM BACK GUARDRAIL 1 PC Y SPACE BLOCK 2 PCS DESK BACK RAIL 1 PC X BOTTOM BACK SIDE RAIL 1 PC SUPPORT POST 1 PC
LOFT BED WITH DESK DA6580 groove groove 2 holes The 2 holes on cross (F) face the same direction as the grooves on posts ( A & B). STEP 1 One of the headboard crosses (E) has a warning label on it. Do not use it in this step. Insert wood dowels (7) into the ends of headboard cross (E) and headboard center cross (F). Insert headboard panel (H) into the grooves of the headboard cross (E) and headboard center cross (F).
LOFT BED WITH DESK DA6580 warning label groove groove 2 holes The 2 holes on cross (G) face the same direction as the grooves on posts ( C & D). STEP 2 Use the headboard cross (E) with warning label in this step. Insert wood dowels (7) into the ends of headboard cross (E) and headboard center cross (G). Insert headboard panel (H) into the grooves of the headboard cross (E) and headboard center cross (G).
LOFT BED WITH DESK DA6580 8 3 Holes on this side 7 STEP 3 Do not fully tighten bolts in this step, this will facilitate assembly in the following steps. Insert wood dowel (7) into each end of the long guardrails (M), desk back rail (U) and bottom back guardrail (V). Attach long guardrails (M), desk back rail (U) and bottom back guardrail (V) to back posts (B and C) with wood joint connectors (3) and Allen key (8) as shown. Insert wood dowel (7) into each end of the desk front rail (K).
LOFT BED WITH DESK DA6580 5 W 5 Back View STEP 4 Insert barrel nuts (5) into top front side rail (I). Attach top front side rail (I) to front posts (A & D) with joint connectors (1) as shown. Insert barrel nut (5) into top back side rail (J) and bottom back side rail (W). Attach top back side rail (J) and bottom back side rail (W) to back posts (B & C) with joint connectors (1) as shown. Tighten joint connectors (1) with the Allen key (8).
LOFT BED WITH DESK DA6580 7 11 S 8 11 STEP 5 Insert wood dowel (10) into holes of the short guardrails (N) and attach it to short guardrail post (S) with joint connectors (11) and Allen key (8). Insert wood dowel (7) into end of the short guardrails (N) an attach it to left front post (A) with wood joint connectors (3). Attach the short guardrail post (S) to top front side rail (I) with joint connectors (11) and hex cap (12) as shown. Fully tighten the joint connectors (11) with the Allen key (8).
LOFT BED WITH DESK DA6580 X V C U 9 8 W B STEP 6 Attach support post (X) to desk back rail (U), bottom back guardrail (V) and bottom back side rail (W) with joint connectors (9) as shown. Tighten joint connectors (9) with the Allen key (8).
LOFT BED WITH DESK DA6580 7 7 13 14 7 13 14 7 13 V 13 14 13 7 14 7 X STEP 7 Insert wood dowels (7) into the holes of desk front rail (K), desk back rail (U) and support post (X). Attach the L shaped metal plate (14) to support post (X) and desk back rail (U) as shown above using joint connectors (13) and Allen key (8).
LOFT BED WITH DESK DA6580 9 14 9 14 14 14 9 U 13 8 14 9 X View from underneath the desk STEP 8 Attach desk panel (T) to the assembled unit and secure it to desktop front rail (K) with joint connectors (9) as shown. Secure the desk panel (T) to support post (X) and desk back rail (U) using joint connectors (13) through metal plates (14). Tighten joint connectors (9 & 13) using Allen key (8). NOTE: Fully tighten all joint connector installed in previous steps.
LOFT BED WITH DESK DA6580 J L I STEP 9 Attach a slat (L) onto top side rails (I & J) of the top bunk with flat head screws (4). Make sure the slat touches the corner posts (as close to the headboard as possible). Attach the other slats (L) onto the top side rails (I & J) with flat head screws (4). Use space block (Y) to space them out evenly as shown. Use Phillips screwdriver (not included) to tighten flat head screws (4).
LOFT BED WITH DESK DA6580 7 2 8 O 7 Q Q STEP 10 To assemble the ladder, insert wood dowels (7) into the ends of the ladder steps (Q). Attach left ladder end (O) and right ladder end (P) to ladder steps (Q) with wood joint connectors (2). Tighten the wood joint connectors (2) with the Allen key (8).
LOFT BED WITH DESK DA6580 STEP 11 Attach the ladder to the top front side rail (I) with flat head screw (15) as shown. Use Phillips screwdriver (not included) to tighten flat head screws (15). Attach the guardrail leg (R) to the short guardrail (N) and top front side rail (I) with flat head screws (6). Attach another guardrail leg (R) (on the other side of the bed) to long guardrail (M) and top back side rail (J) with flat head screws (6) as shown.
LOFT BED WITH DESK DA6580 CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE BED. DO NOT ALLOW CHILDREN UNDER 6 YEARS OF AGE TO USE THE UPPER BUNK. BED IS DESIGNED FOR CHILDREN RANGING FROM 6 YEARS OF AGE TO YOUNG TEENAGERS.
MODEL #: DA6580 Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S). Customer Service Phone Number 1-800-295-1980 Customer Service Fax Number 514-353-7819 Email: das@dorel.
