Instruction manual

10
The locking clip is used to prevent the vehicle belt from
loosening in the event of a sudden stop or crash.
Before you put your child restraint in the vehicle,buckle
the lap/shoulder belt.Pull on the lap belt portion.If it
loosens or slips,you must either use a locking clip to
hold the seat belt tight or move child restraint to
another seating location.
Note: A locking clip will not fix all types of seat belt
problems.
• Check vehicle owner’s manual if locking clip is
needed.
• You will find the locking clip inserted on the
back of the child restraint.
•A locking clip can only be used on a lap/shoulder
belt combination.
Thread the vehicle
lap/shoulder belt through
the correct belt path.
Buckle the vehicle seat
belt.Pull up on shoulder
part of belt until all slack is
removed and lap belt is
tight.
Locking Clip Installation
1
9
Child Restraint Description
Rear-facing position;
Less than one year old and
between 2.3-14 kg.(5-30
lbs.) and 48-81 cm.(19-32
inches) tall. Infant and
infant restraint are placed
in the back seat and face
the rear of the vehicle.
NOTE: Infants one year
old or less must be rear-
facing.
Forward-facing
position;
Over one year old and
between 10-18 kg.(22-40
lbs.) and 74-102 cm
(29-40 inches) tall.Child
and child restraint are
placed in the back seat
and face the front of the
vehicle.
NOTE: Children must
be 1 year old or older for
forward-facing position.
Your child’s height,weight and age determine how your
child restraint should be placed in the vehicle and which
restraint should be used.
WARNING
!
Verify your child’s weight and height (do not
guess) before choosing the child restraint
position.
continued on next page.
4358-3951B Can Scenera Eng 6/20/07 8:48 AM Page 15