Instruction manual

41
42
6
Thread left harness strap
through left buckle plate
and right harness strap
through right buckle
plate. Make sure to push
through from the back
of buckle plate.
Thread harness ends
through chest clip.
Push left harness strap
through left harness slot
and right harness strap
through right harness slot
at the same height.
Note: DO NOT twist
harness straps.
Fit harness strap loops
onto splitter plate in the
back of child restraint.
5
Failure to install the harness system
properly can result in serious injury or
death to the child.
WARNING
!
4
Push one harness end
through lower harness
slot on the left side of
child restraint.
Thread harness strap under
seat of child restraint. Be
sure harness adjustment
strap is between shell and
harness strap.
Push end of harness strap
up through lower harness
slot on the right side of
child restraint.
Note: DO NOT twist
harness straps.
4358-3951B Can Scenera Eng 6/20/07 8:48 AM Page 47