Instruction manual

40
39
Installing Seat Pad
Install Harness System
continued on next page.
Replace seat pad by
reversing order (see
“Removing Seat Pad for
Cleaning” section). Start
by laying pad in shell and
tuck in pad around
harness adjuster lever
cover. Make sure holes in
foam pad align with
harness slot holes before
wrapping pad over top of
shell. Hook the elastic
straps at top of seat. Turn
seat over and thread all
elastic straps into the
holes and connect them
to the posts. Install
Harness (see “Installing
Harness” section).
1
From the front of child
restraint,push buckle’s
metal plate through pad
and shell. Make sure that
buckle is facing out.
1
Pull up on buckle/crotch
strap to make sure
buckle’s metal plate is
completely inserted
through the pad and shell.
WARNING
!
Failure to place buckle’s metal plate
completely through pad and shell can result
in serious injury or death to the child.
2
From underneath child
restraint,pull buckle’s
metal plate through the
pad and shell.
3
4358-3951B Can Scenera Eng 6/20/07 8:48 AM Page 45