User's Manual

ManualsBrandsDorel Juvenile Group ManualsBaby MonitorsBaby Monitor

WiFi

Baby

Monitor

You can also:

Send Us a Text: 1-

812-203-4747

(US and Canada Only

Carrier Fees May Apply)

Find Us Online: www.

safety1st.com

Email Us:

support@djgusa.com

Give Us a Call: 1-800-544-1108

(Toll Free)

STRANGULATION HAZARD -

Children have STRANGLED in cords. Keep

this cord out of reach of children (more than

3 feet (0.9 m) away). Do not remove this

tag. Use wall clips provided to secure cord away from

baby’s reach. Only use the AC adapter provided by the

manufacturer. NEVER use an extension cord with the AC

adapter.

5.17.21 4358-8154B MODEL: MO173

WARNING:

Summary of content (8 pages)

PAGE 1
WiFi Baby Monitor You can also: Find Us Online: www.safety1st.com Email Us: support@djgusa.com STRANGULATION HAZARD Children have STRANGLED in cords. Keep this cord out of reach of children (more than 3 feet (0.9 m) away). Do not remove this tag. Use wall clips provided to secure cord away from baby’s reach. Only use the AC adapter provided by the manufacturer. NEVER use an extension cord with the AC adapter. MODEL: MO173 Give Us a Call: 1-800-544-1108 (Toll Free) WARNING: 5.17.
PAGE 2
In The Box Features Please read the following instructions and warnings carefully. Keep these instructions for future reference.
PAGE 3
Cleaning & Disposal Getting Started Download Safety 1st App Download the Safety 1st Connected app by searching for Safety 1st in the app store. Setup 1. Connect the micro USB cable with power adapter to monitor. Staus LED will ﬂash red and the device is now ready for pairing. 2. On your mobile device, follow the step by step instructions in the Safety 1st Connected app for setup. 3. Once paired, the status LED will turn blue. 4. Explore the features and functionality within the Safety 1st Connected app.
PAGE 4
Mounting Monitor Tools required for mounting monitor (not included): • • Phillips screwdriver Drill with 3/16” size bit • Hammer • Pencil WARNING: STRANGULATION HAZARD Children have STRANGLED in cords. Keep this cord out of reach of children (more than 3 feet (0.9 m) away). Do not remove this tag. Use wall clips provided to secure cord away from baby’s reach. Only use the AC adapter provided by the manufacturer. NEVER use an extension cord with the AC adapter. 5 Wall Mounting 3’ (0.
PAGE 5
6. Locate the hole underneath the base of the monitor and place it on the wall mount. d. Close the top cover to secure the cord in place and insert provided screw and tighten into wall anchor. 7. Applying light pressure to the base, slide the monitor DOWN on the wall mount until it clicks ﬁrmly into place. DO NOT pull on the monitor head. Rotate and tilt the monitor to ensure it is fully attached to the wall mount. e.
PAGE 6
WARNING: For indoor use only. To reduce the risk of ﬁre or electrical shock, DO NOT expose this product to water or moisture. DO NOT use monitor near water (such as bath tub, sink, etc.) or submerge in water. This monitor is not intended to be used as a medical monitor and its use should not replace proper adult/ parental supervision. You should check your child’s activity at regular intervals as this monitor will not alert parents to the silent activities of a child.
PAGE 7
This baby monitor allows internet users to hear or view activity. Use the security feature included with this device to restrict internet viewership. IMPORTANT SAFETY INSTRUCTIONS DO NOT place adapter/wall plug under a window where a child might use it to step on and/or to reach something that might be dangerous. • HEAT: The monitor should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat. Also keep these components out of direct sunlight.
PAGE 8
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning this equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.