Instruction manual

C. Basic Use
Check Buckle
Position
Determine which of the three
buckle/crotch strap slots that is
both comfortable and snug to
use.
Note: Thread buckle/crotch
strap through the slot closest to
child.
5.
13
From the front, pull
buckle/crotch strap free
from shell and pad.
c.
continued on next page.
You MUST use the 1st or 2nd buckle/crotch strap
slots when rear-facing. Any slot can be used for
forward-facing.
1
2
3
Rotate buckle/crotch
strap’s metal retainer,
then insert retainer up
through the shell and pad.
b.
To Change Buckle
Position
Turn the restraint system
over and locate the
buckle/crotch strap’s
metal retainer.
a.
C-2 Preparing Restraint System to Fit
Your Child
Release Chest Clip
Press on chest clip release
button and pull apart.
Loosen Harness Straps
Push in on the harness
adjustment lever under the
flap. Pull out on harness
straps just above buckle
tongues.
You MUST make these adjustments with your child before you
install the restraint system in the vehicle.
Unbuckle Harness Straps
Press down on the red
buckle release button to
release the buckle tongues.
Place harness straps over
sides of restraint system.
1.
2.
3.
Place Child in Restraint
System
Place the child’s bottom and
back flat against the restraint
system. This will increase
comfort and allow the
harness straps to be properly
tightened.
4.
14
4358-5405 Can Scenera 12/8/10 2:50 PM Page 15