Instruction manual
28
27
C. Basic Use
Remove Buckle from
Restraint System
From the front, pull
buckle/crotch strap free
from shell and pad.
5.
4.
Insert Metal Retainer
Through Shell and Pad
Rotate buckle/crotch strap’s
metal retainer, then insert
buckle/crotch strap’s metal
retainer up through the shell
and pad.
C-8 Removing Pad for Cleaning
You must remove the harness straps to remove the pad
from the shell. See section C-7.
continued on next page.
1.
Remove Lower Harness
Guides (on select models)
Remove both lower harness
guides in bottom of seat.
Turn the seat over and
locate the lower harness
guides.
2.
Place the screw driver’s tip
between shell and harness
guide, then twist the screw
driver while pulling the
harness guide from the
front. Repeat for other side.
3.
Remove Pad
(partial wrap pad)
From the back of shell,
release the elastic straps
shown in red.
A.
NOTE: Depending on your model, follow the information that
matches your model.
Remove Pad
From the front of restraint
system, remove pad from
shell, starting at the top,
then the sides.
4358-5405 Can Scenera 12/8/10 2:50 PM Page 29