User's Manual

75Ω-Coaxial
Audio R
L
Video
1 2 3 4
75Ω-Coaxial
Audio R
L
Video
Line - In Out
In
Out
VIDEOAUDIO
DC-9V IN
75Ω-Coaxial
Audio
Video
VIDEOAUDIO
DC-9V IN
Page 9
Use of COAX converter is required (not included)
*Switch TV to corresponding converter specification
1. Plug Audio/Video Cables (red is audio and yellow is video) from Base into COAX converter (not included).
2. Plug other end of COAX converter into television’s antenna in jack.
3. Turn on TV to view baby. Unplug COAX Converter to view television program.
Receiver
Rear of TV
CONNECT TO A TV WITHOUT AUDIO/VIDEO JACKS
Base
CONNECT TO TV WITH AUDIO/VIDEO JACKS AND A VCR
1. Plug Audio/Video Cables (red is audio and yellow is video) from Base into VCR’s line in. Plug one end of the second set of cables into
VCR’s line out. Plug other end into any available Video Jacks on your television (diagram above shows line 4). Note: Second set of cables
are for use with second Base. If you use them for TV/VCR hook up and also wish to use your Second Base Unit, you will need to purchase
an extra set of Audio/Video cables (not included).
2. Turn on VCR. Switch from Tuner to “Line In”. (Refer to VCR Owner's Manual.)
3. Turn on TV. Switch to corresponding Input (Example shows input #1).
Receiver
Rear of VCR
Base
Rear of TV
Audio (red)
Video (yellow)
Audio (red) Video (yellow)
COAX Converter (not included)
48018 sights & sounds 11/7/00 12:14 PM Page 9