SPECIFICATIONS

Vehicle Systems Systems Operation
Hydraulic Control Valve
(1) Relief Valve - Hydrostat. (2) Inlet/Outlet Body. (3) Center Spring. (4) Center Body. (5) Spool. (6) Tie Stud.
(7) Quick Disconnect Gauge Body. (8) Check Valve. (9) Seal Rings. (10) Main Relief Valve.
7
Assembly And Construction
Above figure is a cross-section view showing con-
struction and assembly of a three-section valve.
The Quick Disconnect Gauge Body section also con-
tain a relief valve assembly.
Passages between the bodies connect each section
to the common inlet and tank ports.
Seal rings between the sections seal the connecting
passages, Sections are held together by studs and
nuts.
IDCS102S
10
1
3
9
7
4
5
2
6
8
CAUTION
Hex head must face out of
valve toward spring and
plug.