SPECIFICATIONS

Vehicle Systems Specifications

Lift Relay Group - Full Free

Triple Lift

Do not put a lift truck into service if the chain wear

indication is 2% or more. A Reading of 2% or more

could cause damage or injury to persons.

(1) Maximum chain wear Less than 2%(See Chain

Wear in TESTING AND ADJUSTING).

(2) Put LOCTITE NO. 242 Thread Lock on the

threads of the relay group locknuts after adjust-

ment of the lift chains is completed.

(3) Tighten bolts until contact is made with guide

assembly.

(4) Distance from bottom of inner mast to bottom of

lower bearing on carriage must be 41 L1.5 mm

(1.61 L 0.6 in).

Bottom of inner mast be even (flush) with bottom

of stationary mast. Adjust inner mast first.

WARNING

IDCS193S