SPECIFICATIONS

Vehicle Systems Specifications
Lift Relay Group - Full Free Lift
Do not put a lift truck into service if the chain wear
indication is 2% or more. A reading of 2% or more
could cause damage or injury to persons.
(1) Tighten bolts until contact is made with guard.
(2) Put LOCTITE NO. 242 Thread Lock on the
threads of the relay group locknuts after adjust-
ment of the lift chains is completed.
(3) Maximum chain wear Less than 2%(See Chain
Wear Test in TESTING AND ADJUSTING).
(4) Distance from bottom of inner mast to bottom of
lower bearing on carriage must be 41 L1.5 mm
(1.61 L 0.6 in).
Bottom of inner mast must be even (flush) with
bottom of stationary mast. Adjust inner first.
WARNING
69
1
2
2
3
3
4
IDCS175S